Home Blog  
Education / Training Crosman 2300S target pistol – Part 3 Accuracy!

Crosman 2300S target pistol – Part 3 Accuracy!

Crosman 2300S target pistol- Part 1
Crosman 2300S target pistol- Part 2

by B.B Pelletier

I knew the 2300S was going to be an accurate pistol, so my day on the range was a pleasant one. I tested all pellets for grouping at 15 yards. That doesn’t sound like a long range, but I was using the target sights provided. In other words, open sights.

Looking for the right pellet
I struggled at first, and I’m not afraid to admit it. I was able to get four of five shots inside a dime, but there was always one flyer that opened it up to one inch. I tried the following pellets: Crosman Premier 10.5 grain, Crosman Premier 7.9 grain, Gamo Master Point, Winchester hunting pellets, Crosman Premier Super Match, Crosman Copperhead pointed, JSB Exact Diabolo Heavy 10.2 grains, H&N Finale Match (pistol) and Beeman Kodiak.

None of the pellets I recommended so boldly last week in How to find the best pellet seemed to make a difference. Beeman Kodiaks were the best, but even they were not giving me the groups I had hoped to get. Yes, there is a “but” coming. First, I want to cover some interesting things that turned up during shooting.

The sights are incredible!
I have liked the Williams rear sight from the beginning. Once I had the chance to adjust it, however, and see what a fine sight it truly is, my enthusiasm only increased. The click adjustments remain velvety smooth throughout the range, yet each one is as precise as the others. That’s true for both windage and elevation adjustments. The adjustment increments are so small that you can “walk” a pellet into the 10-ring without compromise. With some other sights, you might get close; but, with this one, you’ll be spot-on if you take the time to adjust the sight correctly. Crosman needs to make this sight available as an option for their other pellet pistols, and I can see it on some entry-level 10-meter pistols, too.

Loading is tricky
I remarked on this in the second part of this report, and the problem continued while I was target shooting. In fact, I have to rule out wadcutter pellets altogether. They are simply too finicky to load into this pistol. Other short pellets, such as Crosman Pointed and Crosman Premier 7.9-grain pellets, were hard to load, too. What happens is that the pellet gets stuck either in the loading port of the barrel or just before that as it enters the breech. It often flips sideways. If you’re not careful, you’ll have a pellet jammed sideways in the breech. I kept a .177 cleaning rod on my shooting bench and had to use it several times.

On the other hand Beeman Kodiaks and 10.2-grain JSB Exact domed pellets fed very well. The Kodiaks also proved to be the most accurate pellets of the test, which was good. However, that was only after I discovered THE SECRET to making this pistol shoot.

2300s-kodiak-tgt-web
Beeman Kodiaks gave the best groups, once the power was turned all the way up. Shot from a rest at 15 yards with open sights.

What’s the secret?
When I dialed the power from midrange all the way up as far as it went, the groups shrank to just over dime size with most pellets. This isn’t a drawback; because, as I reported before, the 2300S gives you way more shots from a powerlet than most other air pistols. So, my advice is to run the gun wide open all the time. The long Lothar Walther barrel keeps the discharge down to a neighbor-friendly level.

I was shooting Gamo Master Points when I upped the power, and the groups suddenly shrank into half the size I’d been seeing. At first, I thought the pellets were completely responsible. While they’re a very good pellet, most others were more accurate on high power, as well.

gamo-hunter-tgt-web
Gamo Hunter pointed pellets were surprisingly good.

The 2300S was designed for airgun silhouette competition in the IHMSA production class. It will probably be shot from the Creedmore position. (with a handgun, the shooter is lying on his back and holding the pistol steady with one or both legs). In that solid position, this revolutionary new air pistol from Crosman will be almost as accurate as a rifle.

author avatar
Tom Gaylord (B.B. Pelletier)
Tom Gaylord, also known as B.B. Pelletier, provides expert insights to airgunners all over the world on behalf of Pyramyd AIR. He has earned the title The Godfather of Airguns™ for his contributions to the industry, spending many years with AirForce Airguns and starting magazines dedicated to the sport such as Airgun Illustrated.

78 thoughts on “Crosman 2300S target pistol – Part 3 Accuracy!”

  1. BB,

    I am thinking about getting an airsoft sniper rifle and I was wondering if the Super X-9 Swat Sniper Rifle by NeonFire-UHC is a good choice for a begginer.If there are others in that price range that are better please tell meabout this.Thanks and even though I dont write much I still read the colum every day and enjoy it.Thanks.

    CF-X guy

  2. CF-X guy,

    I have no experience with this model, but as long as you don’t intend taking it into a skirmish, I’m sure it’s okay.

    It doesn’t seem to have a tight barrel and I can’t tell whether the Hop Up is adjustable of not, so you won’t be sniping at humans at 100 yards. But for general fun, why not?

    B.B.

  3. b.b.
    Currently own a 2240 and a 1377. I plan to update both with new grips but it’s the sights that I dislike. Any alternatives for either? Red dot makes 2240 heavy and 1377 has a barrel that twists under weight. Thanx for great blogs. Learn more here than in books.

    Bill D.

  4. Bill D.

    Crosman sells Williams notched and peep sights for 3/8″ dovetail mounting. The way to mount them on a 2240/1377 is to use a steel breech kit. Crosman carries steel breech kits that fit the 2240 or 1377 and have a 3/8″ dovetail. Custom accessories like this can be purchased from Crosman’s online store at http://www.airguns.com/onlinestore. Just click on the custom accessories link.

    Pyramyd AIR doesn’t carry these Crosman items, but the Beeman Sport Aperature Sight from Pyramyd MAY work (don’t know for sure).

    .22 multi-shot

  5. Hi BB,

    I have an old UK version of the 1377. The only reliable way to load wad-cutters is to hold it vertical, with the barrel pointing at the ground, and drop the pellet into the breach nose first. It takes a few goes to get the knack, but then 99.9% reliable. Would this method work on the 2300S? Seems a shame if you can’t use wad-cutters on a gun with the potential for target use.

    A.T.B.

    Tenuc

  6. I just purchased the 2300S and I agree that the pellet loading problem is a real concern. Many of my best pellets were seemingly not suitable for this gun!
    Also, the power adjustment screw at the rear of the gun (un)screws “forever” when trying to reduce power; is this normal?
    Thanx—————–D.G.

  7. D.G.,

    The reason the power adjust moves so far is to provide a tighter control over velocity. At least that’s what I think Crosman had in mind.

    As I have said many times, I see no difference in accuracy between Kodiaks and Kodiak Match pellets. You will get a benefit from weighing your pellets and grouping them into weight groups. But that effect doesn’t start showing itself until beyond 20 yards.

    B.B.

  8. I’ve had a 2300S about two weeks now, a well-made accurate pistol and easily worth the price. I quickly gave up trying to load “short” pellets and started dropping-in Premier Heavies as follows; hold gun in left hand with muzzle pointed down. Open the bolt and hold it open with your left thumb. Drop pellet into breech pointy-end first. Close bolt, remove safety and shoot. Looks like Crosman has a winner, anybody know if there are wooden grips available for it yet?

  9. Oops, answered my own post. Crosman.com shows several wood grips that appear to be for the 2300, different types of wood, target or sportsman, right or left hand, $40 – 60.

  10. Mr P – Your enthusiasm about the 2300S prompted me to purchase same and its a crowd pleaser. More than 1 friend has followed suit. What long eye relief scope do you recommend for it?
    Thanx….Gerry

  11. BB.

    Im looking for a target/silhouette pistol. Im willing to spend around $800 but $1000 would be the limit.
    It must be a PCP or CO2 since the altitude i live at is not aproriate for single or multi pumps.
    What would you recomend?

    Thanks in advance
    Silhouette

  12. Silhouette,

    I recommend a PCP target pistol. There seems to be a changing of the guard right now. IHMSA who has governed the sport for years is now partnered with the NRA and it is unclear if gthe IHMSA classes continue to exist. So I cannot advise you further untilI find out who’s in charge and what their rules are.

    B.B.

  13. Thank goodness for wonderful wives who buys their guy this pistol on his birthday.

    Yep. My wife got me this 2300S recently. Of course my mentioning how much I was in lust for it may have had something to do with it. 🙂

    Beautiful gun. Fun to shoot. Love the sights. After getting the trigger pull down to minimum I found it better. I will be getting some nicer wood target grips for it.

    Pellet loading is a PITA. My 1377C loads easier. I thought I had seen somewhere in a comment on one of your posted blog entries that Crosman had fixed this but can’t find that comment now. I’ve only tried two pellets so far. Gamo Match and one other unknown brand round nose and both are hard to keep straight when loading but both are shorter pellets. I will have to try other longer and maybe heavier ones.

    It may be frustrating getting the pellet to load but that doesn’t take away from the enjoyment of shooting this gun.

    Thanks for your write up on this one BB. Made me want it.

    Rabbitt

  14. One thing I did forget to mention BB.

    It seems that under the “Care and Feeding” section of the “owners manual” Crosman has added a sentence about adding a drop of Pellgun oil to the tip of each C02 powerlet installed.

    Gee. I can’t imagine where they got that suggestion from, can you? 🙂

    Keep up the great blog BB.

    Rabbitt

  15. BB. ABout the pellet loading.

    I guess it is always possible that I got an older one that had not been fixed. My wife did get this gun from Pyramyd AIR within the last few weeks but who knows.

    It is a bit of a pain but doesn’t detract enough to worry about.

    I did find that using a small flat blade screwdriver to push the pellet in with by adding some pressure to the bottom of the pellet works by keeping the pellet straight as it goes in.

  16. LOL. Then my work here is done. 🙂

    Glad I could brighten up your day BB. Your blog has brought sunshine into many of mine.

    The next time (or first) you’re in Omaha the beer is on me.

    Rabbitt

  17. Hi,B.B

    It’s Steven again with another question. My English is not good. hope that doesn’t bother you. My question is about “dry fire”. With the co2 cartridge charged, I push the bolt handle up and pulling it all the way back until I hear two clicks, then fire without pellet. This is called “dry fire”. Am I right? And this will damage the pistol. Right? And if I do all the above things only without a co2 cartridge inside my pistol, it won’t hurt the pistol. am I right? Execuse for my entrance level questoins. Thanks in advance.

  18. Steven,

    Your English is fine. Your description of dry-firing is correct.

    Dry-firing with the CO2 catridge installed will NOT harm your gun. It will waste CO2, of course. It is better for the valve to dry-fire with CO2 in the gun.

    B.BN.

  19. 2300s, love it, love it,had this gun for 3 months,got a bushnell trophy red- green dot sight on it
    also got rb red wood grips on it
    love to send a pic of it to you.
    i found loading with crosman destroyer pellet alot easier,this gun is nothing but fun and dead on!!!!

  20. Too bad Crosman didn’t design a better trigger into this gun.

    I polished the engagement surfaces, applied molly grease, and installed a lighter trigger return spring. All of which helps, but the trigger is still too creepy for best accuracy.

    A trigger shoe should help trigger address feel, but I haven’t done that yet.

    I guess there is no way to turn a sow’s ear into a silk purse.

    Aside from the creepy trigger this gun is one of my favorites, and could have been a real winner.

  21. BB,

    My 2300S arrived from Pyramid yesterday. Unfortunately, it’s raining quite a bit today, so I don’t know if I’ll be able to shoot it today.

    I confess that I was a bit apprehensive about paying $200 for an air pistol. After all, you can buy a rimfire pistol for $220, but I found 2300S appealing for some reason. After getting it out of the box, it definately feels like a real gun. It has good heft to it and very good balance. Best of all, no plastic other than the grips.

    I noticed that a common complaint with the 2300S was that the grips feel like they’re slipping when you hold the gun. I knew what they were talking about because I have a 2240 and the grips feel like they’re slipping also. So I kind of knew what to expect. Imagine my surprise, however, when the grips on my 2300S felt quite solid. I’ll probably get wood grips, but Crosman seems to be using better grips. So perhaps you’re right in that Crosman is listening.

    One question, the bolt slide seems to be dirty and in need of some lube. Is there a problem with using Hoppes #9? I won’t let it touch the seal. I still have a tube of Crosman’s pelgun oil lying around for that. I may later lube the bolt with Dri-Slide.

    Another question has to do with my 2240. It seems that the screw that holds the rear sight won’t hold the sight. It’s as if the screw got stripped out. Do you know where I can get a replacement for the rear sight?

    Thanks,

    Carl

  22. Carl,

    Hoppes #9 is not oil, it’s solvent. It will ruin the seals of your airgun. Hoppes GUN OIL, however, is oil and it okay to use.

    For the stripped screw, call Crosman and ask what they recommend. The hole will have to be drilled and tapped for the new larger screw.

    B.B.

  23. Im looking for 20-25 yard backyard pistol. I’m torn between the daisy 747 and crossman 2300s. How much louder is the 2300s….to loud for neighbors? Does the 747 has enough power to shatter clays at that distance?

    Has anyone seen a newer variant with the claimed fixed loading area to confirm this?

  24. WOW fast reply!

    Yeah I meant shatterblasts clays.
    So the gun is still competent at that distance accuracy wise(DAISY 747)?

    I shoot my crossman storm with GRTIII in my yard lately its just with my daisy 008 pellet gun the neighbors notice the fast shots from the loud co2.

    my main concerns are

    1)accuracy at 20-25 yards

    2)trigger feel

    3)usable easy to see sights(reviews complain of the daisy plastic sights but is the sight picture nice is the question?)

    4)pellet ease of loading(supposedly this is fixed on the 2300s) if I cant use wadcutters I would say accuracy suffers IMHO

  25. John,

    The 747 competes in air pistol; silhouette, so it’s accuracy at 25 yards is good. The sioght picture is okay, but a trifle melted if you are usaed to real target sights.

    I’ve only heard from our readers that the 2300 feed problem is fixed; I don’t know personally. Fixed would mean wadcutters, too. If the Daisy 008 is too loud, the 2300 probably will be, too.

    B.B.

  26. thanks so much for the help. I’ll go with the daisy 747 as my b-day pick. I’m partial to daisy as my 1st airgun was a daisy rifle…….I like what I have read about it. The lack of co2 and super stealth lack of noise really excite me. I’ll post back when I finally get it end of the month for my b-day! I will get the 2300s down the road maybe x-mas 🙂

  27. Recently purchased a 2300S…really like this pistol. Problem though-I got a pellet stuck at the end of the barrel (at the the muzzel). How do I get it out? I tried a 177 cleaning rod from the end of the barrel at the the Muzzel…the pellet will not move. Will the barrel come off? How? Thanks for any help!

  28. The pellet will give if you coax it enough. You’ll have to drive it back into the barrel with a section of cleaning rod that you tap with a hammer. Once you get it moving, you should be able to continue to push it down the barrel with hand pressure alone. Just start it about an inch with the hammer, then see if it won’t move on its own. the object is to push it all the way down the bore and out the breech. the bolt has to be retracted for that, of course.

    A bigger question is how you got a pellet stuck at the muzzle in the first place. You must have continued to shoot the gun after the gas pressure dropped. That’s not a good idea for this very reason.

    Is there more than one pellet stuck in the barrel? If so, you’ll have to apply more force to remove it.

    If you don’t feel comfortable doing this job, you might want to find a local gunsmith to do it for you.

    B.B.

  29. Just got my 2300S today, have put maybe 60 rounds thru it it start break-in. Even though I’m very early in the process, a few comments for those considering this gun.
    First, I love the feel and balance of the gun. Grips, even though plastic, fit me well and provide sufficient stability. I may change to wood later, but to start these are good enough.
    Second – and this is important – be prepared to work with a gun that is extremely TIGHT when new. By that I mean all tolerances seem very exact, so things tend to “stick” for awhile. When I first opened the breech, I almost thought I had a defective item since it took so much effort to fully open. Don’t be afraid to use steady force to do this, though. It just needs repetition to develop a smoother movement.
    Same held true in closing the breech. When loading the first pellet, I thought either I had a deformed pellet of the barrel at the breech was machined a millimeter too small. I was afraid I would crush the pellet given the pressure I had to use to fully seat it and lock the lever. Again, I was wrong. After a couple dozen rounds, eveything began to loosen up a tad and become easier. So don’t be afraid of it.
    The comments I had read about the Williams sight canting about 5 degrees to the left when installed on the rails is true. Here again I thought I had a bad item, but I re-read some posted comments and saw I was not alone (although not all people mention this problem). I’m going to keep playing with the thing to see if I can finally get it to set in a perfect 90 degree upright position. Otherwise, it’s a distraction from an otherwise beautiful and highly accurate sight. I love the click adjustment feature, very precise and moves in tiny increments, then holds them true.
    The front sight is also as reported, i.e. skinner than the gap in the rear sight, so you have daylight on both sides of the post when properly aligned. Perdonally, I prefer not to hav that, and I don’t know why Crosman doesn’t simply make the front blade wider so as to close it up. I’m going to get bust with a Dremel tool and some very small pieces of hardwood and make a rectangle of sorts the right width to fill the rear sight notch, drill a small hole in the botton, and insert over the front post. Might not be the prettiest thing in the world when done, but I’ll get the sight picture I want.
    Other items such as trigger pull, maintaining of pressure for 60+ shots, etc. will have to wait for more break-in before comment. But sitting here right now, knowing what I already have found out, I’m 90% sure that in a month, after 1000 rounds thru the barell, I’m oing to have a swett-shooting pistol that I can pop asprin tabs with at 25 feet nine out of 10 times. Mostly due to the gun, not my expertise.

  30. OneshotOnekill,

    What a great review of your new gun! I can feel your enthusiasm. I’m so impressed by your entire story and experience that I’m going to copy it and post it under the current/active comments section.

    Your comment and my answer is appearing under the article that B.B. did on a crossman 2300S (just like yours) back in 2006. Please join airgunners, like you, exchanging ideas, asking questions and answering them on the current comments section. You’ll also find your comments re-posted there as well. You’ll need to copy and paste this link:

    /blog//

    Hope to see you there!

    kevin

  31. BB – 2300S trigger question. As others noted, trigger creep is bothersome on my unit. Is there a remedy or has Crosman addressed this? FWIW – mine easily loads and likes Crosman Comp and Premier Super Match wadcutters and Gamo Rockets.
    Thanx…..Gerry

  32. Crosman 2300T/s trigger deficiencies can be easily cured. The key is to remove play between the trigger and the sear lever. The easiest way to do so is to place an additional spring between the front part of the trigger and the tube above triger mechanism. Of course smoothing and polishing the sear lever surface that works with the rear part of the trigger is highly recommended.I’ve done this small modification and the trigger works impeccably, light as a feather and no creep at all! Link to the post describing this modification: http://www.airguns.pl/forum/viewtopic.php?t=1729 The post is in Polish, but the picture and photos are self explanatory. Enjoy! This gun is quite different now!

  33. YES, I AGREE LOADING IS QUIT A PROBLEM. I HAVE REMOVED THE BARREL AND POLISHED IT WITH EMERY CLOTH TO A VERY HIGH SHINE AND IT STILL IS VERY DIFFICULT TO LOAD. I SURE HOPE THAT THERE WILL BE AN UPGRADE FOR THIS PROBLEM AT YOUR COST TO EVERY ONE THAT HAS PURCHASED A 2300S. THIS IS THE MOST DIFFICULT AIR PISTOL TO LOAD I HAVE EVER HAD . WHEN DESIGNING THIS GUN WHAT THE HELL HAPPENED TO RESEARCH AND DEVELOPMENT WITH THIS PROBLEM. WERE THEY ON VACATION OR DID THEY JUST NOT GIVE A S**T ABOUT THE DIFFICULTY IN LOADING. THIS IS A VERY ACCURATE PISTOL BUT AS STATED LOADING IS A “JOKE” FOR THE PRICE PAID FOR THE GUN. EVERY ONE SOLD SHOULD BE RECALLED AND REPAIRED. PERHAPS A DIFFERENT BREACH OR RAMP CONFIGURATION. WELL I GUESS THIS IS ENOUGH, I COULD COMMENT ON ABOUT THIS GUN ALL DAY LONG ABOUT HOW DISSATISFIED I AM.> AND THAT THERE HAS BEEN NO SUGGESTION OF A REMEDY ON HOW TO REPAIR IT. GUN IS FOR SALE !!!!!!!!!!!! IT HAS NOT BEEN SHOT VERY MUCH LIKE MAYBE 200 PELLETS IT’S TO DAMN HARD TO LOAD !!!!!!!!

  34. Hi BB, yes, I know, you wrote this back in 2006…. 🙂 After reading this, I’m thinking to mod my 2240 with a Lothar Walther barrel. I’m purchasing one from a local supplier. How can I tell if it’s a “real” LW barrel. Crosman has two 10.1″ barrrels and only the LW is match grade. The supplier gave me the OEM part number as 2300-102, but it’s not the same on the 2300S parts list (2300-002). Do you know if these are the same? If not, do you have a contact at PA or Crosman that know? Thanks for your help!

    Regards,
    Peter

      • Hi BB, back in Feb I was thinking of spending the $$$ and purchase the 10.1″ Lothar Walther barrel for my 2240…until I read your 2300T piece on “The OTHER miracle handgun”. Appears the Crosman 10.1″ barrel performed similarly as the Lother Walther. Given the big price difference, do you feel the Crosman barrel is better value? I don’t compete, but would like an accurate gun. Is the Lother Walther too much barrel for a Walmart 2240?

        Regards,
        Peter

          • Hi BB, the Lothar Walther arrived yesterday. I installed it right away and did some test shots. The lead-free wadcutter pellets I was using had flattened skirts after firing. I haven’t noticed this in my other pellet guns. Is this due to the choke or is the barrel defective? Have you seen this before?

            Regards,
            Peter

              • Hi BB, the skirts appear to be squeezed flat, no longer a conical shape. I will collect them to determine if all were like that. I have not a chance to check accuracy yet, but they am getting 1″ groupings at 25′. I know it can do better. Judging from your test of the 2300S the LW barrel should shoot dime sized groups. I don’t have the 2300S, but rather a 2240 with a LW barrel; stock springs and valve, power adjuster. At full power, with a 2240 stock hammer spring, it was clocking at 600 fps using .177 Daisy Precision Max flathead lead-free pellets. Daisy tells me they weigh in at 4.94 grains, somewhat lighter that other alloy pellets. Does the barrel have to break in? I will update after a few more tests this weekend. I’m concerned about the crushed skirts.

                Regards,
                Peter

                  • Hi BB, thanks for your diagnosis, I will pull the barrel out to see if anything is getting caught! hate to break it before even get to enjoy it! …updates to come

                    -Peter

                  • Hi BB, the pellet could actually be hanging up on the air transfer port. I swapped out the stock bolt with an extended probe bolt and appears the skirts are in much better shape. I guess the extended probe pushes the pellet in further pass the transfer port. Honestly, I haven’t noticed this before using the stock bolt that came with the Crosman steel breech. Does a pellet usually sit in the barrel on or passed the transfer port?

                    Thanks,
                    Peter

                    • Peter,

                      The goal is for the pellet to be just in front of the transfer port. But as you know, every pellet is different. Those with large cavities allow the probe to enter farther and they don’t get pushed in far enough.

                      B.B.

Leave a Reply to Anonymous Cancel reply

Buy With Confidence

  • Free Shipping

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

  • Shipping Time Frame

    We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays because we know how excited you are to receive your order. Weekends and holiday shipping times will vary.

    During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.

    View Shipping Times

  • Shipping Restrictions

    It's important to know that due to state and local laws, there are certain restrictions for various products. It's up to you to research and comply with the laws in your state, county, and city. If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.

    U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.

    View Shipping Restrictions

  • Expert Service and Repair

    Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.

    If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.

    By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.

    View Service Info

  • Warranty Info

    Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.

    A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.

    View Warranty Details

  • Exchanges / Refunds

    Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.

    If you need to return an item please read our return policy.

    Learn About Returns

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.