Home Blog  
Education / Training Evanix Renegade double-action pistol Part 3

Evanix Renegade double-action pistol Part 3

by B.B. Pelletier

Part 1
Part 2

Today, we’ll finish the report of the Evanix Renegade pistol with the accuracy test. Thanks for being so patient. The weather and some other duties made me postpone the test until yesterday. The day was near-perfect, with only a slight breeze that didn’t get above 5 m.p.h.

While the day was perfect, I wasn’t! I left my shooting table at home, so I had to improvise a rest. I put the sandbag over the back of a chair and rested the gun on that. It worked fine and was as steady as it gets, but it sure looks odd!

10-15-08-chair

This may not look comfy, but it was actually a very solid rest. Note how far back my sighting eye is from the eyepiece. That’s the long eye relief scope at work.

The scope I mounted is a Leapers UTG 4×40 Tactedge with long eye relief. That allows me to hold the pistol somewhat forward instead of putting my eye up to the screen. Of course, I had to get used to only 4x magnification; once I did, it seemed to do the job. Remember, deer hunters shot at 100 yards with nothing more than 4x for decades! And, this scope is one of the clearest, most parallax-free you can find. While I would be happier with double the power, this is a fairly good match for the pistol.

10-15-08-scope

Leapers Tactedge 4×40 scope fits the pistol well and provides some eye relief.

Eun Jins were first
The first pellets I tried were Eun Jins, based on their performance in the velocity test (part 2). I would have thought they would have been okay, because they gave an average of 610 f.p.s.–but they weren’t.

10-15-08-tgt1

Not only is this a large group for only 25 yards, several of the pellets appear to be tipping as they pass through the paper. The pellet on top is the most evident. That’s an oval hole if ever there was one.

The Eun Jins were not fully stabilized, as evidenced by the oval holes they cut in the target. They also grouped around 2″ at 25 yards! Time to look elsewhere.

Next came Kodiaks
Beeman Kodiaks were next. They developed an average 692 f.p.s. for an average muzzle energy of 22.34 foot-pounds–about what we expect from a really great-shooting RWS Diana 48 in .22 caliber. I knew from the first group that this is the pellet for the Renegade pistol.

10-15-08-tgt2

Beeman Kodiaks grouped very well at 25 yards. This group of 4 is about a half-inch. That’s with an air PISTOL, folks!

Naturally, the lighter Kodiaks didn’t shoot to the same point of aim as the Eun Jins. They had to be adjusted up just a bit to get on target. Once there, they did the job in a workmanlike manner.

10-15-08-tgt3

This group of 5 Kodiaks represents an average group at 25 yards. It’s 0.925″ between centers of the two widest shots.

One thing I noticed with both Eun Jins and Kodiaks was that there are only 6 usable shots in the single-action mode. After that, the pellets start falling lower…even at 25 yards. Since double-action is reserved for followup shots only, plan on filling the gun after every cylinder.

Overall observations
The Renegade pistol is very powerful and quite accurate for a pistol. It can definitely be used for hunting game up to the size of a raccoon. While it’s not a small handgun, it’s much more compact than even a short carbine. If you’re looking for something small to carry into the woods, this could be it. Personally, I’d shoot single-action most of the time and use double-action when I needed a quick follow-up shot.

author avatar
Tom Gaylord (B.B. Pelletier)
Tom Gaylord, also known as B.B. Pelletier, provides expert insights to airgunners all over the world on behalf of Pyramyd AIR. He has earned the title The Godfather of Airguns™ for his contributions to the industry, spending many years with AirForce Airguns and starting magazines dedicated to the sport such as Airgun Illustrated.

37 thoughts on “Evanix Renegade double-action pistol Part 3”

  1. Morning B.B. I’ve really be enjoying the TalsonSS that you recomended to me. A very interesting gun. Beeman Kodiaks group the size of my little finger nail with enough horsepower to go clean through a 2X4. The 24inch barrel is back ordered. I was having troubles with my Benjamin pump. Off to Crosman and replaced under warranty all of which took 11 days–THANKS Crosman. A .5 inch group out of the Renegade wow power, accuracy, and good looks. A small carbon fiber tank and you’re good to go. God review thanks Mr B.

  2. BB,
    I bought a stash of old airgun magazines, brochures, most of the Airgun Letters, etc. from another airgunner. Your Airgun Letters are great. My question though, is from an article in a magazine you did about the Diana 27. The Diana 27 is my favorite model of airgun. I just love the way it feels in my hands and I enjoy the craftsmanship that was used on such a simple gun. I read that you used a white grease for a coating on the mainspring. You said that the tune was done before JM’s products became available so, I was wondering if you would still recommend that white grease for a 27 and other low powered guns? I have found that even a light coat of heavy tar is often too much for the small rifles and that using only moly doesn’t give the desired effect. The white grease sounds live a viable alternative.

    Like I said, I really enjoyed the Airgun Letters. One of my favorite articles was a story you told about trying to help someone pick out an airgun at an airgun show. It is one I can certainly relate to. I enjoyed so many of the articles you wrote on different models of airguns. Since I am rebuilding a P1 right now, your articles about the P1 have been helpful. Tell your wife that I also enjoyed a lot of her articles. My favorite was the one where she bought you an airgun on the sly for Christmas.

    Thanks for everything,

    David Enoch

  3. bg_farmer

    I know what you mean, I was apprehensive the first time I used a non-factory replacement spring. I was really concerned about the gun being coil bound and not cocking. But so what? It just meant that the gun would have to come apart again to shorten the spring a little bit.

    Aside from a snug fit between the spring and the spring guide, I’ve found that many piston guns will really benefit from a longer guide than factory. Anywhere from half to three quarters of an inch–maybe even more–can be crammed into most spring guns. The extra bit of central support for the spring helps ensure that it doesn’t cant.
    Like a spring that’s too long for the gun, if the guide is too long, the gun won’t cock. Err on the side of function.

    Derrick

  4. David,

    You are entirely correct about tar and the Diana 27. I think my white grease or some other not-so-viscous petroleum-based grease is the way to go. Not only is it thinner, but it wicks up the leather piston seal to provide a continuous supply of fuel for the rifle. You never have to lube the piston after that.

    That HW 77 Edith surprised me with was a real shocker, I can tell you. I expected the R1 under the tree, but the second long box was unexpected.

    B.B.

  5. Mr. B.,

    You have a red-hot SS, if it will pass through a 2 by 4. I don’t think I’ve seen another that will. The 24-inch barrels are on backorder at AirForce. I was over there yesterday and Yvette told me they are waiting for them to arrive. Apparently they are really putting the pressure on Lothar Walther with thousand-barrel orders!

    B.B.

  6. B.B.,

    Is it worth shooting a multipump gun at lower power levels to test the precision of the pellets?

    I was playing around with my Daisy 22SG. Even though the gun doesn’t have enough power to mushroom the Crow Magnum pellets, I was curious about cone of fire. At 4 pumps JSB Domed Exacts were a clear winner, shooting a 5 shots group at 10 meters that could be covered with a dime. The Crow Mangums were several inches at 4 pumps. However if I used 10 pumps, then the Crow Magnum pellets tightened up remarkably. My interpretation is that at the higher velocities the Crow Magnum pellets are spinning fast enough to be stabilized.

    For the lower power to be a good indication of pellet performance over longer distances, it would seem that the spin rate of the pellet would have to drop in rough correlation to the velocity. Does this in fact happen?
    Herb

  7. B.B.,

    A followup question would be how do the twists in an air rifle compare to a 22 rim fire? It would seem that an air rifle would need many more twists since the pellet is traveling slowly. A high spin rate would average out imperfections in the pellet. Correct?

    Herb

  8. Hank,

    I was taught to shoot the 1911 by a Distinguished Master shooter. That’s an Olympic-class shooter.

    Read this:

    /blog/2005/4/grasp-the-secret-of-accurate-handgun-shooting/

    and this:

    /blog/2005/05/the-beeman-p1hw45-is-one-of-my-all-time-favorite-air-pistols/

    B.B.

  9. Hi BB,

    I have recently become the proud owner of a used .177 Daystate Harrier X which is currently in transit. I understand that you have a Daystate Harrier. I know that they are different rifles but am assuming/hoping that they will behave similarly.

    I am considering either crosman premier heavies, JSB heavies, or Eunjins. I would prefer to use the JSB heavies to prevent leading of the barrel. However sometimes premiers are more accurate. I can manually load the longer eunjins. I am mainly looking to shoot the heaviest and most accurate .177 pellets. Do you have any recommendations or insight from experience?

    Thanks
    Henry in NJ

  10. Henry,

    My experience says Kodiaks, but JSB pellets were not in widespread use when I shot that rifle a lot.

    Kodiaks beat Premier Heavies in my gun.

    Eun Jins wouldn’t even be on my list. they are for hunting, not precision.

    I get 24 shots at 930 f.p.s. from a 2650 psi fill.

    B.B.

  11. I would like to add a light to my rifle for shooting coons and possums that get into my garbage. I don’t want to spend a ton of money or have an external battery. I would like to find something that would allow me to mount a small flashlight to my scope or I also thought about mounting a small piece of a picitinny rail to my foregrip so I could mount a light there. Does anyone have any experience with gun lights or have any other Ideas?

  12. Evening B.B. A red hot SS, nice to know. I’ll run some numbers tomorrow and let you know what I find. The trick with the springs and washers makes it much quieter than I thought it would. Have you ever tried it? 15/16th OD fit inside the barrel with a piece of PVC as a bushing to compress the whole colume behind the end cap. Mr B.

  13. Matt61,

    I’m with you again about shots per fill, groups are number one, but I’m waiting for more shots per fill, and I want low noise like my Air Arms S410.

    The Right-hand Alfa-Air competition PCP pistol by Alfa-Proj with Air-Arms technology…. That is supposed to be at PA by 10/17 is interesting, has any one tried one?

    B.B. will you be testing it? Is it new?

    There is no info on the PA site about it… just:

    “Alfa Pre-Charged Pneumatic Pistol

    Limited edition. This is a unique gun, limited quantities available .177cal 500fps $599.”

    Although it’s not even close in the power category, with Renegade, it might give the accuracy and closer to the number of shots some of us are looking for..

    I just had a local customer order a Benjamin HB22 .22 cal pump pistol… It only costs $127 retail, and says it shoots 460fps in .22 cal, and has good customer reviews..
    I’m going to order it for him, unless you guys say it’s a dog…
    then, I’ll advise him….to what?

    thanks,
    Wayne,
    Ashland Air Rifle Range…

  14. B.B.

    I saw your comments on testing a Career Infinity. I’m presently in Inchon, Korea, (visiting), and just had the opportunity to hold, handle, and cycle, one of these side-lever rifles in a retail shop. I wish I could have shot it! I think you’ll find the action as slick and smooth as can be. Can’t wait to hear your report – this is probably one I’ll want.

  15. Anonymous,

    You’ll need a pretty powerful light to take advantage of your rifle’s range I would think.

    Wayne, don’t forget to let us know when you get the S410 magazine fixed.

    Matt61

  16. Mr. B.,

    When I worked at AirForce, the production manager and I worked out several methods of making an SS quieter without changing the external appearance. I have the best of these prototypes in my SS. It’s about half as loud, from my observation, as a standard SS.

    B.B.

  17. Wayne,

    I have wanted to test the Alfa Proj for several years. The problem is that Pyramyd AIR only gets one or two in stock, and I hate to deprive them of a gun they can sell.

    Maybe it’s a Catch 22, since they won’t sell very many unless I review it.

    I did a three-part review of the HB22. It’s here:

    /blog/2007/9/benjamin-hb22-part-3/

    The gun is not as fast as the specs say, but it is a good-looking air pistol.

    B.B.

  18. B.B.

    That’s good news about the review on the Infinity. I hope you can get the Alfa Proj soon as well..

    So, it seems like there isn’t much to compare out there in the pump up pistol area. Just the crossman 1377 in .177 and the Benjamin HB22, the only .22 cal pistol pump I can find on PA.. Am I missing something? I guess my customer will have to make do with pinching fingers, a hard trigger, not up to advertised fps, and hard pumping after 5 pumps… I’ve let him know these things, and he is still thinking he wants it.

    I told him that a lot of you are happy with the 1377, especially with the aftermarket fixes.. so he considering…

    Is there anything else he can consider?

    Wayne,
    Ashland Air Rifle Range

  19. B.B.

    Thanks, I'll mention it to him…. Would the 1377 shoot .22 cal faster than the HB22, since the HB22 was shooting under the advertised fps? And the 1377 shoots the .177 at 600fps? Is that with 7.0 hobby?

    I get the idea he wants as much power as possible, and doesn't mind the hard pumping at the end. He also said he was willing to pay more for a air pistol, but didn't want a PCP or CO2, he didn't think… he's new to the game too..

    Wayne
    AARR&R

  20. B.B.

    Thanks, Yes, that does make the choice more difficult.. It sounds like either one will need some tinkering to be what he will want..but the HB22 is probably going to be his choice, I’ll bet..

    Since they are both fairly cheap, I’ll get them both, and let him try them both.. It looks like I should get the BSA 30mm red dot sight as well with the B272 intermount.. since the sights are so lousy..

    Wayne,
    Ashland Air Rifle Range

  21. Wayne,

    This is way off track, but did you think about a Daisy 747? These are sweet plinking or target pistols.

    I have one with RB hardwood grips on it and it is great for indoor and close outdoor use. Unless your friend wants an airgun for pest control, in which case almost any rifle will do better, it is hard to beat the 747 for the $$.

    Volvo

  22. Volvo,

    He wants to hunt and plink with it..

    Was it mostly the finger pinching, or was it other things as well? Could one get use to a certain way of closing and keep fingers safe? Or maybe make a different handle, with more clearance…

    Wayne

  23. Wayne,

    I actually never pinched any fingers in it, just seemed like you had to be very careful not too. As far as hunting, you could put 8 pumps in it a head of time and go out, but once in the field, slapping it closed 8 times would certainly warn all but the silliest critters.

    The issue I have had with trying to hunt with stock air pistols is the accuracy is ok for a larger target but not the power. Excluding the new PCP pistols. I think a low power .22 is worse than a .177 due to a lack of penetration.

    Plinking wise, it was just too much work.

    Obliviously, these are just my opinions. I’m sure some guys love it as it has been around for a long time. I know you would not.

    But, the customer is always right. Let him get one and then sell it used on the classified if he doesn’t like it, or maybe keep it for your range.

    Volvo

  24. Volvo,

    That was a real great review… I didn’t and I bet he didn’t think of the “slapping closed” noise issue..

    Independence from a pump or scuba tank has a price after all…. hard to have it all in one pistol package at an affordable price, or maybe at any price..

    Maybe he should move up to a longer pistol like the Discovery?

    It’s only a little longer than the Rendgade… maybe 18″…. he won’t notice…he’d be happier in the long run.

    Wayne

  25. I noticed they have few nice air pistols at crookedbarn.com.

    I like the CB1322. Often thought about a 2250 with pistol grips which seems to be like the Tom Cat .22 model at crooked barn.

    Both look like pretty solid well modified air pistols. Not a bad price when considering the cost of customizing one at the crosman sight,adding grips and customizing the trigger.

    I guess the base model of the 1377 helps those who want to get started, but it’s nice to see a lot of mods out their for those who want a little more.

  26. B.B.

    First of all…

    “Once, toward the end of the session, I instinctively smacked the end of the barrel to break the rifle open.”

    You had me LMAO! Now THAT is funny!

    Now, I have to ask…

    Which do you like better?
    The AR6 pistol or the Renegade pistol?

    – The BBA –

Leave a Reply to wayne Cancel reply

Buy With Confidence

  • Free Shipping

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

  • Shipping Time Frame

    We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays because we know how excited you are to receive your order. Weekends and holiday shipping times will vary.

    During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.

    View Shipping Times

  • Shipping Restrictions

    It's important to know that due to state and local laws, there are certain restrictions for various products. It's up to you to research and comply with the laws in your state, county, and city. If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.

    U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.

    View Shipping Restrictions

  • Expert Service and Repair

    Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.

    If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.

    By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.

    View Service Info

  • Warranty Info

    Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.

    A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.

    View Warranty Details

  • Exchanges / Refunds

    Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.

    If you need to return an item please read our return policy.

    Learn About Returns

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.