Will this mount work on a Gamo Whisper Fusion IGT with a Gamo 3-9x40AO scope? The beefed up stock rail has dual stop pins and I've read that this mount won't fit on or with some rifles/scopes. I'd like to know before purchasing!
Will this fit an RWS Diana 34 with T05 trigger?
.025 correction per "what"??? The correction number is meaningless without that.
So I am guessing its suppose to be .012 instead of .025 . Anyway it moved my point of impact up approx. 10 inches Probably within scope adjustment range. BUT I went a bit further and shimmed the rear of the scope up .016 and got the point of impact to 5 inches low . SO with 1 and 1/4 turns of up adjustment got me on bulls eye
I hear you Steve ! . 30 yards = 90 feet X 12 inches = 1080 inches x .025 = 27 inch at 30 yards sight in distance. here is what I found on my FWB 124 My FWB 124 was shooting 19 inch low with straight mount at 30 yards . With a factory Zeroed Scope . With this mount it now shoots 10 inches low
you need to multiply .025 by inches you are shooting
Is this an ideal mount for an RWS Model 54 Air King?
This mount would work, I would suggest a mount with double strap rings as an extra measure.
will this fit hw50s?
What is the length?
4 and 5/8"
will this fit a RWS 350 Mag
Yes, it will
Which way is the arrow supposed to point?
It is supposed to point towards the barrel, not towards the shooter
Would this fit on RWS 460 .22 Magnum with T06 Trigger?
Yes, it will
Is this compatible with my Hatsan 125.
I ordered 2 for the exact guns, then was afraid these were RWS specific. Of course, after I mounted them, I decided to check here for a Q&A. Seem to mount up just fine! Thanks for posting the Q and Q'ing it yourself.
After ordering this product the answer to my question is yes it will work on the Hatsan 125 and the Hatsan 95 both.
Will this work with Diana 34 with a T06 trigger?
Yes it will.
How much is the barrel droop compensation?
My FWB 124 was shooting 19 inch low with straight mount at 30 yards . With this mount it now shoots 10 inches low
.025 of an inch
Will these mount work with the Leaper 4x19 AO 40 mm scope and clear the gun barrel?
Yes the 40mm objective should be fine.
Will this mount accommodate a 50A/O scope?
I wouldn't recommend it. You should go with a high scope mount