Things I liked:Pretty Solid Construction Things I would have changed:Possibly slightly different placement of the structural pillars, but no real problems there. What others should know:If you plan on locking, there are four lock points and if you don't secure them all a rifle can be slid out easilly. Really not good for security purposes. But for the price can't be beat.
Things I liked:Blowback, nice weight and feel, decent accuracy. Very fun plinker. Things I would have changed:The barbed safety release switch spring tension is too high. With less tension you could operate the safety more easily and would be more inclined to use it consistently. You could engage the switch and then jam a small piece of plastic into the gap; however this would reduce the safety to a simple toggle switch. The high tension safety could be viewed as a positive because a child's hands lack the strength to disengage it. Obviously no one should substitute a mechanical safety for proper storage and ample gun safety training. What others should know:The BB "roll-out" problem only seems to occur for me when the CO2 is essentially spent, i.e. when the gun stops self cocking consistently. Keep your eye on the rear red "cocked" indicator to confirm this situation when CO2 is too low. FYI, when you empty the clip and the slide locks into the back position a subsequent trigger pull will not spend CO2, which is nice. Buy the two extra clips when they're available, you'll want them.