Things I liked: This gun is simply a gamble. It may last you 2 years (like my first) or 2 months (like my 2nd). But regardless, both broke in the same way under excellent care and supervision. This model has a defect in the trigger assembly that gives every shot a chance to be the last. Trust me folks this is something I happen to know alot about. I've had two of these exact models and both of them broke due to a poor design in the trigger assembly. Sooner or later this item will fail to operate and render itself a $75 dust collector. If I were you I would seriously consider taking this gamble. However, when this gun is operable, it is quick, extremely accurate, and one of the best I've used.. It just won't last too long.. The gamble is up to you, friends.
Things I would have changed: TRIGGER ASSEMBLY needs to be changed. Poor design and engineering resulted in a poor and unreliable system that can fail at anytime. The piston and spring gets held back at a 45 degree angle, then when the trigger is squeezed, the spring's pressure pushes the assembly down using the 45 degree angle and the piston is released through the chamber.. However, the 45 degree angle is a poor way to hold such a powerful spring back. Once the trigger is slightly worn(due to any amount of use), the angled piece will simply slip off of the piston and render the entire weapon useless. This should be fixed with an un-angled assembly, or heavier metal internals that will not give in to the constant friction of each trigger pull.
What others should know: Be careful friends