Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    FREE USA GROUND SHIPPING
    Continental USA. On orders $150 and up
    Cannot be combined with coupons.

    Product: UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift

    UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift
    Review entered on 2010-04-10 09:34:56

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Carl Jones from USA on 2010-04-10
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Easy to mount, nice fit, does what it's designed to do. I tried mounting a scope on this rifle years ago and gave up getting it sighted in. Then the rear sight spring came out and I was just shooting it using guestimation which worked but wasn't consistent. This mount and a scope put it right in the black every time. This rifle is now usable.
    Things I would have changed:nothing
    What others should know:Easy solution to mounting a scope to a Diana RWS 34.

    Product: Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles

    Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles
    Review entered on 2010-06-14 12:49:05

    Overall rating:4.0 4.0

    Value for money:5.0 5.0

      By Carl Jones from USA on 2010-06-14
    See all my reviews
     Was this review helpful?
    5.02 ratings
     
    Things I liked:I wasn't sure if this would make any difference on my old Diana 34 .177. Once I got it installed the difference was noticeable, the rifle shot a little more stable and sounded smoother. Some modifications had to be made to make this fit my rifle so I had someone with a drill press drill it out a little so that it'd slip over the end of the barrel. Well in the process, his Dad who works as a machinist came by and when I got the gun back the end of the barrel had been ground a bit to make it fit. While I wasn't excited about the way he did the job I have to admit he did a good job and said his concern was about the thing being "aligned". anyway, now that it's done I don't intend on taking it off anyway .
    Things I would have changed:Nothing, it wasn't an out of the box fit for my rifle but I bought it knowing I might have to put some effort into installing it.
    What others should know: I won't say this made the gun "quieter" however the improvement does reduce effect that causes some noise and makes the rifle a bit more stable. I haven't tried covering the holes as some stated but about all I hear now is the spring.

    Product: Crosman Pellet Loader, Holds 16 .177 Cal Pellets

    Crosman Pellet Loader, Holds 16 .177 Cal Pellets
    Review entered on 2010-06-14 12:53:26

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Carl Jones from USA on 2010-06-14
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Makes finding and loading (some) pellets a lot easier.
    Things I would have changed:make a .22 version
    What others should know: handy little gadget to have when walking around in the woods.
    Shop at Gun Mall
    Back to Top