Things I liked: For starters, it's a beautiful gun for the money. At 30 feet it shot a 2" grouping right out of the box on center. It tightened up to 1" within 200 shots. Definitely a gun made for two hands. Enjoyable to look at and fun to load and shoot. If you are looking for the revolver experience this is the one to get. The longer barrel improves your accuracy.
Things I would have changed: The barrel is attached to the body in one spot on top producing a hinged connection. My barrel was loose enough to fit a hypodermic needle in on each side and squirt exterior wood glue in the joints. After that dried clear it is as tight as it should be with no visible glue since it is deep in the seams plus it shrinks as it dries. They should put in 2 fasteners for the barrel to eliminate the swivel or figure out a better way of tightening it up so it doesn't flop around. Paint quality could be better. The grey primer is visible in all the nooks and crannies on the barrel and muzzle.
What others should know: Be careful with the speed loader. Mine broke after using it twice. It's all plastic (minus the spring) and the pieces are glued together making for a fragile piece of equipment. For what you get at regular price of $20 to replace it should be better quality and hold up to handling.
Things I liked: This mount and scope were recommended by a Pyramid Air staff member. I have learned that it is best to do one's own research. This mount is too long and does not fit the Browning 800 Express I bought it for. The base of the mount is about 1/4" too long for the dovetail on the gun. To make things worse the (2) hex wrenches included in the kit are both too small and do not fit the mounting screws. Although it looks like decent quality for the money what good is it if you can't use it.
Things I would have changed: Make sure the hex wrenches work with the screws provided before packing. That is not Pyramid Air's fault but after all the product is made in China. Customer/tech support should be better informed with product compatibility before making recommendations and wasting customer's money and trust.
What others should know: This mount will not work with a Browning 800 Express. It is too long to fit the gun's grooves. You will not be able to use the mounting hex wrenches provided, they are too small. I'm guessing they are also poor quality (why include 2 if you don't expect them to break.)