Things I liked:Very good mount. Rock solid. I paired it up with a Leapers 4x32 AO Mil-Dot scope. Looks great on my Benjamin Model 392.
Things I would have changed:The Intermount is a very well made, high quality mount. The problem is with the inability to get a consistent cheek weld on the stock. This creates a problem because the eye cannot be positioned in the same place shot to shot. In order to shoot the tightest groups possible from your gun, your eye needs to be positioned in the same place,(preferably in direct alignment with your target and crosshairs), every shot. If its a little high, low,left, or right of its position on the previous shot, the impact on the target will shift. This occurs even though the crosshairs are still on target. While the Benjamin is a fine gun worthy to be called a classic, it's stock was not designed for a scope mounted this high
What others should know:I removed the Intermount without any modification to the stock on my Model 392, and put the scope on my Beeman Rr7. This allowed the scope to be mounted low on the gun, providing a solid cheek weld. The gun shoots crazy good. No problem with the scope. If your intentions are to modify your stock by adding a raised cheek piece, I feel the Inermount will tighten your guns groups.The Air Venturi Intermount is a high quality product that will provide a rock solid mount for the scope of your choice.
Things I liked:I really like the AO feature on this scope and the ability to focus the ocular lens to your eye. This allows you to clearly see your target, crosshairs and Mil Dots all perfectly focused. The Mil Dots allow precise shot placement at distances other than your zeroed setting. Adjustments for elevation and windage are easily made using your fingers and clicks are precise with no lag. 4x provides sufficient magnification while allowing a great field of view. Optics are sharp and bright. Things I would have changed:Lens covers work great for keeping out the bad stuff, however I prefer to remove them when shooting to prevent loss, especially on the ocular end. What others should know:Weaver rings supplied are of excellent quality and provided a solid mount for the scope with zero movement. The cleaning cloth and Allen wrenches also supplied were very much appreciated.