Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    Product: Air Venturi Scuba Tank Adapter & Hose Assembly, 1/8 BSPP Threads, Gauge

    KingMan Air Venturi Scuba Tank Adapter & Hose Assembly, 1/8 BSPP Threads, Gauge
    Review entered on 2013-09-24 11:43:58

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Clay from USA on 2013-09-24
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Works well, just get this and the quick disconnect adapter. Then buy a 'K' valve scuba tank and forget about the pump.
    Things I would have changed:People complain about the hose being too short, seems fine for me.
    What others should know:Easy to use, no Teflon tape needed as others suggest. Just make sure everything is tightly secured, slightly crack the scuba valve and you're topped off! Turn off the scuba valve then open the bleed valve to clear the hose pressure and pop off the quick connect fitting and all set!

    Product: Air Venturi Foster Female Quick-Disconnect to 1/8" BSPP Male, 5000 PSI

    Air Venturi Foster Female Quick-Disconnect to 1/8 inch BSPP Male, 5000 PSI
    Review entered on 2013-09-24 11:52:41

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Clay from USA on 2013-09-24
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Works as described, no problems.
    Things I would have changed:Should be included with any external air tank supply hose as part of the setup.
    What others should know:Mandatory item for Marauder, should be included for free instead of the degasser.

    Product: RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation

    RWS Lock Down 1-Pc Mount w/1 inch Rings, 11mm Dovetail, Barrel Droop Compensation
    Review entered on 2013-11-11 10:36:08

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Clay from USA on 2013-11-11
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Excellent product. Designed to fit RWS rifles perfectly. PA has it for at least 10 bucks less than other places. Has special anti-creep stud built in to match top of rifle.
    Things I would have changed:Maybe a little lighter but still retain the high quality. Make it in Germany or even the USA and put more of us back to work.
    What others should know:Don't mess with cheap .22 mounts that you have knocking around like I did. Bite the bullet (pellet) and get these. You don't have to crank up the scopes elevation to compensate for barrel droop. The mount is already set to go.
    Shop at Gun Mall
    Back to Top