Things I liked:accuracy! i shot these to "sight in" my airforce talons open sights and red dot sights. i was astounded to see that at a measured 21 yards i was able to eat away the black of the bullseye of a less than 1" (i used a nickel to draw the outline with) i shot a total of 15 rounds at each target, one for the open sights, one for the red dot and had only 4 rounds that did not go into the black! i was very impressed with the accuracy! i will continue to use these pellets in this Airforce Talon. Things I would have changed:nothing...they're very well made pellets What others should know:they may be dirty, but hey, that's what Dawn dish washing detergent is for isn't it? wash them in a solution of warm/hot water and 3-4 drops of Dawn...let them soak..(i usually let them soak over nite) rinse thoroughly with warm/hot water...spread on soft dry cloth and let air dry...
Things I liked:shape of these pellets is outstanding. very aerodynamic, clean right from the tin and accurate. Things I would have changed:screw top tin What others should know:I've been shooting air guns for more years than i care to say and i find these pellets to be among the best, if not the best, pellets I've shot from my .20 caliber Beeman RX1. i was sighting in a 'new' scope, recently, and was becoming frustrated with the groups i was shooting with the XXX pellets (the groups were adequate for hunting, though, at 1.5"/1.25" at 35 yards) i purchased some JSB's and tried them...the groups dropped to less than 0.75" @ 35 yards first time. need i say more?
Things I liked:the stock...the feel...the appearance. it has a good feel and handles well. it cocks easily and is easy to shoulder and aim. good quality materials and overall design and execution of details. Things I would have changed:I'd like to see a better quality control before delivery to the distributor from the factory to head off potential "issues" What others should know:the rifle i received seems to have "issues" with accuracy. (maybe it's just this individual rifle.)
i found that the front stock mounts loosen after about ten rounds from the recoil, the barrel pivot bolt works loose in about the same. I'm working on a resolution; the POI changed dramatically frequently.
i had to bevel the chamber as it was difficult to load a pellet.
i have been unable to actually zero the rifle as the issues have been being dealt with as i find and identify them. I've gone thru nearly 400 rounds for "break in" now and hopefully i have identified and will resolve the issues.
the potential and power this rifle exhibits are worth looking into for the price and the little bit of effort it takes to make it into a good rifle for the dollar.