Birchwood Casey Gallery Resetting Airgun Target

Birchwood Casey Gallery Resetting Airgun Target
Review entered on 2013-02-01 13:08:54

4.0 4.0

5.0 5.0

By Brian from USA on 2013-02-01
See all my reviews
Was this review helpful?
5.02 ratings

Verified Purchase

Things I liked: Sturdy construction, works with all my airguns-1000 to 400 fps. Arrived fast and undamaged, with cheapest shipping rate.

Things I would have changed: The orange stickers fell off after two hits each! The whole target will move around if you just lean it forward on the leg props. Doesn't stick in the ground so good.

What others should know: Paint the targets white, get a piece of 8"x 8" scrap 16 inches long, mark where you want the legs. Drill a 3/8" hole for each, 2" deep, angled at 60 degrees of lean. Stick target in, so the front is leaning toward the firing line. Now you don't have to worry about it flopping around, move it wherever you want, and take the target inside when you're done ,nice and clean.

Navigation