Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    HFC HG-196 Full Metal Gas Airsoft Pistol Owner's Manual

    HFC HG-196 Full Metal Gas Airsoft Pistol

    Product Code: HG-196
    Hop-Up: ADJUSTABLE
    Mode: Semi Auto
    Power Source Green Gas
    Weight: 2.6 lbs (1,150 g)
    Length: 11 1/2inches (295.0mm)
    High Capacity: 33 rounds
    Comes with orange paint on tip
    HFC HG-196 Full Metal Gas Airsoft Pistol
    HFC 196 Airsoft Pistol Name of Parts
    HFC 196 Airsoft Pistol Operation of Thumb Safety
    HFC 196 Airsoft Pistol Refilling Gas
    HFC 196 Airsoft Pistol Loading BB Bullet
    HFC 196 Airsoft Pistol Firing
    HFC 196 Airsoft Pistol HOP UP Adjustment
    HFC 196 Airsoft Pistol Explosion

    HFC 196 Airsoft Pistol Name of Parts

    HFC 196 Airsoft Pistol Name of Parts

    HFC 196 Airsoft Pistol Operation of Thumb Safety

    HFC 196 Airsoft Pistol Operation of Thumb Safety

    Warning: When the hammer is at the B position, great care should be exercised not to cause an accident fire.

    Never move the hammer to the fire position unless it is aimed to fire.

    The gas feeding bullet and the pulling trigger is a linkage action. Each pulling of trigger means a bullet is loaded and fire. If the trigger is pulled half way, it will render duplicate loading in the next pulling trigger.

    When the trigger is press, the hammer will move from A posotion to B position, and the gas will eject from the nozzle to feed the BB bullet into the firing chamber, a fire position.

    back to top

    HFC 196 Airsoft Pistol Refilling Gas

    HFC 196 Airsoft Pistol Refilling Gas

    Warning: The magazine can be taken off only when the hammer is placed at the normal position.

    The magazine is made of metal material, care shall be taken not to let it fall on the ground and cause damage.

    Never store the gas container in the place where the temperature is above 40C, such as direct sunlight, inside car, fire and hot air conditioner.

    Press the magazine catch and take off the magazine.

    HFC 196 Airsoft Pistol Refilling Gas

    Warning: Refill with HFC-134A gas only. Unauthorized gas would cause incident.

    The refilled gas is volatile which will freeze the magazine. The pistol will come to operation when the magazine recovers to the normal temperature.

    Place the magazine base upward, use authorized gas container, align the injector to the filler, and press downward. It takes about 2-3 seconds to complete the refilling.

    back to top

    HFC 196 Airsoft Pistol Loading BB Bullet

    HFC 196 Airsoft Pistol Loading BB Bullet

    Warning/Caution: Using the standard 6mm diameter really round bullet to prevent damage to the barrel.

    Nonstandard bullet would render poor function or no fire.

    Press the magazine follower and load the 6mm BB bullets along the magazine slot (full loaded 26 rounds)

    While loading, put finger at the back hole to speed up loading.

    back to top

    HFC 196 Airsoft Pistol Firing

    HFC 196 Airsoft Pistol Firing

    Insert the gas filled and bullet loaded magazine into the frame receiver

    Pull down the hammer and take aim (repeated action)

    Aim the target, release the thumb safety, and pull the trigger to fire.

    back to top

    HFC 196 Airsoft Pistol HOP UP Adjustment

    HFC 196 Airsoft Pistol HOP UP Adjustment

    The HOP Up adjustment is to apply a compression on the rubber pad against the bullet, when the bullet is fire, it generates a self upward spinning to extend gunshot, which will be effected by the roundness of the bullet, varying gas propellant, climate and wind.

    Use a hex wrench to adjust. Tightening is to produce upward projectile and loosening is to generate a downward projectile.

    back to top

    HFC 196 Airsoft Pistol Precaution

    Never allow the kid under 18 using the BB pistol alone.

    Always wear goggles while firing. Pay attention never let any person around the firing range.

    Never point the pistol to any person and animal regardless whether the humb safety is on or not.

    Never extend the finger into the trigger guard while it is not ready to fire.

    After long time storage, check all mechanical functino of all parts and apply adequate lubricant to maintain the service life span and smooth performance.

    After finishing the fire practice, make sure there is not BB bullet left in the barrel, take all remainding BB bullet from the magazine, release the gas completely, packing the pistol, Magazine, BB bullets separately in the pack and store it at the safety place where the kid is unable to reach.

    back to top

    HFC 196 Airsoft Pistol Trouble Resolution

    Condition Causes Correction
    No action

    1. BB bullet is not in proper fire position.

    2. The thumb safety is not released yet.

    3. The magazine deformed.

    1. Pay attention to the staggered piling of bullet.

    2. Release the thumb safety.

    3. Replace the deformed part.

    The BB bullet does not eject out of the barrel.

    1. Deformed bullet.

    2. Extraneous materials in barrel.

    1. Load the authorized bullet.

    2. Clean the barrel.

    Low acceleration and short firing projectile

    1. Insufficient gas.

    2. The magazine is too cold.

    3. Worn rubber seal.

    1. Refill the gas.

    2. Use palm to warm up the magazine.

    3. Replace the worn part.

    back to top

    HFC 196 Airsoft Pistol Explosion

    HFC 196 Airsoft Pistol of Parts
    back to top
    Shop at Gun Mall
    Back to Top