TECHNICAL DATA

Hop Up: Adjustable
Effective range: 100 yd
Length: 43.4 inches (1111.0 mm)
Weight 6.5 lbs
Magazine Capacity: 25
Type: Bolt ActionVelocity:
500-530 fps with .12g BBs
400-430 fps with 0.20g BBs
280-300 fps with 0.43g BBs

Component Chart
1. Fire/Safety Selector
2. Trigger
3. Cocking Handle
4. Upper Picatinny Rail
5. Hop-up Adjustment Switch
6. Barrel
7. Butt Stock
8. Magazine Release Button
9. Lower Picatinny Raill
10.Triple FullyAdjustable Butt Pads
11.Double Magazines
12. Deluxe Sniper Rifle Sling with Non-slip Grip
13.Deluxe Spring Operated Speedloader
14. Deluxe Tactical Bipod
15. Allen Wrench and Screw Sets

Warning! Before you follow the assembly instruction , make sure to remove the magazine and set theFire/Safety Selector to the "SAFE" position.

- Install Kit A (Receiver& Barrel) into Kit B
(Stock) (Fig 2.1).
- Lock Kit A into Kit B with screws provided as shown in Fig 2.2. Use the large Allen wrench for Screw A and B. Use the small Allen wrench for Screw C

Warning! Three types o screws are included in this package. Misuse will cause damage to the rifle.

Load BBs

Warning! Always use NeonFire Premium Precision Ground 6mm

BB for accuracy and safety. Never re-use BB.

Load BBs into Deluxe Spring Operated Speedloader

* Locate and push the Rod Release Button to release the Spring Rod. (Fig 4.2) .

* Open the Speed Loader Cap.

* Insert 6mm bbs into the Speed Loader.

Feed BBs From Speedloader into Magazine

* Hold and disengage the magazine by pressing the Magazine Release Button. (Fig 4.1) .

* Align The Tip of Speed Loader with the BB Drop of the magazine. (Fig 4.2) .

* Push the Spring Rod to load BBs into the magazine. Repeat this process until the magazine is full.

* Insert the loaded magazine back into the rifle.

To remove magazine:
Press the Magazine Release Button to disengage the magazine. (Fig 4.1)

The airsoft rifle comes with two great quality Picatinny Rails for installing your accessories such as scope, bi-pod, flashlight, laser sight or others. To mount accessories, please follow their respective instructions.

1. Mount on Picatinny Rail

Clever Picatinny mounting deck allows easy instalation.

2. Panning and Foldable

* Press down the Posi- Lock Button to fold or unfold bipod legs.

* Unique Posi-Lock feature prevents tipping.

* Bipod pans for easy aiming adjustment.

3. Fully Extendable

Unscrew the nut and adjust the length. Once done, tighten the nut to lock the legs.

Firing (Ensure complete safety of environment before firing.)
!!! Activating the trigger carelessly is extremely dangerous. Never set the Safety/Fire Selector off the "SAFE"position or put your finger on the trigger unless the protective plug is removed and you are ready to shoot at a target.

Shooting Operation

* Set Fire/Safety Lever to "Fire" position. (Fig 6.1 )

* Flip the cocking handle upward and pull it backward until it clicks. Then push it back to the original position to complete

cocking in one continuous movement.

* Hold the gun firmly and rest the stock at a comfortable position.

* Aim the rifle at your target and pull the trigger to fire.

Adjust Variable Hop-up System for Best Shooting

* Locate the Hop-Up Switch at the left side of the Foregrip. (Fig 6.2)

* Slide the Hop-Up Adjustment Switch to a desired position

* Shoot a few pellets, exam the trajectory and make further adjustment if necessary.

Maintenance

* Keep the rifle in clean condition.
* Regularly clean the barrel with soft cleaning rod.
* Never use dirty, damaged or distorted pellets.