- Home
- Air Gun Manuals
- SOCOM-PMR-30
Socom Gear Kel-Tec PMR-30 CO2 Airsoft Pistol Owner's Manual
Socom Gear Kel-Tec PMR-30 CO2 Airsoft Pistol
| Caliber: 6mm Overall Length: 7.75 Shot Capacity: 15 Action: Semiautomatic Safety: Manual Power Plant: CO2 Blowback: Yes Material: Metal/ABS plastic Ammunition: 0.2g+ Body Type: Pistol Weight: 1.1 lbs |
|
| Socom Gear Kel-Tec PMR30 Airsoft Pistol Description Socom Gear Kel-Tec PMR30 Safety Socom Gear Kel-Tec PMR30 CO2 and BB Loading Socom Gear Kel-Tec PMR30 Shooting Socom Gear Kel-Tec PMR30 Parts |
Socom Gear Kel-Tec PMR30 CO2 Airsoft Pistol Description
 |  | 1. Slide 2. Slide Catch 3. Safety lever 4. Magazine 5. Magazine holder 6. Trigger |
| Warning YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR SHOOTING GLASSES TO PROTECT YOUR EYES. READ ALL IMSTRUCTIONS BEFORE USING. BUYER AND JSER HAVE THE DUTY TO OBEY ALL LAWS REGARDING THE USE AND OWMERSHIP OF THIS AIRSOFT GUN. TREAT THIS AIRSOFT GUN WITH THE SAME RESPECT YOU WOULD A FIREARM. Use 5 mm BBs or 4.5 mm BBs depending on the version of your pistol. Check box to determine version. Versions are not interchangeable. | ||
| back to top | ||
Socom Gear Kel-Tec PMR30 CO2 Safety
 |  | Warning Carefully make sure that your hands do not get in touch with discharged CO2 gas. This may cause freezing of the skin. Do not expose the CO2 cylinder to excessive heat and do not store it at temperatures exceeding 54�C. Always adhere to the warnings and safety instructions of the manufacturer on the gas cylinder in respect to handling and storage of a C02 gas container. |
| back to top | ||
Socom Gear Kel-Tec PMR30 CO2 and BB Loading
 |  |  |
| 1. Press 2. Remove magazine | 5. Insert the gas capsule as illustrated with the top ahead into. Tighten the gas cylinder holder. Snap in magazine. Insert magazine & Grip strap. | |
 |  |  |
| Put the follower down. Fill in a maximum of 15 rounds 6mm BB or 20 rounds 4.5mm BB, depending on pistol version purchased. | ||
| back to top | ||
Socom Gear Kel-Tec PMR30 Shooting
 |  | 1. Put the safety on "Fire". 2. Pull Trigger |
| Aiming | ||
 |  |  |
| back to top | ||
Socom Gear Kel-Tec PMR30 Parts
 | ||||||||
| 1-01 | Frame(L) | 1 | 1-02 | Frame(R) | 1 | 1-03 | Back Cover | 1 |
| 1-04 | Muzzle | 1 | 1-05 | Trigger | 1 | 1-06 | Safety(L) | 1 |
| 1-07 | Safety(R) | 1 | 1-08 | Slide Stop | 1 | 1-09 | Mag. Catch | 1 |
| 1-07 | Safety(R) | 1 | 1-08 | Slide Stop | 1 | 1-09 | Mag. Catch | 1 |
| 1-10 | Valve Connector | 1 | 1-11 | BB Housing | 1 | 1-13 | Co2 Cartridge House | 1 |
| 1-14 | Safety Level | 1 | 1-15 | Ejection Button Level | 1 | 1-16 | Safety Catch | 1 |
| 1-17 | Recoil Spring Stopper | 1 | 1-18 | BB Stopper | 1 | 1-19 | Trigger Connector | 1 |
| 1-20 | Muzzle Bottom | 1 | 1-22 | Attacked Block | 1 | 1-23 | BB Stopper Spring | 1 |
| 1-24 | Barrel Spring | 1 | 1-25 | Recoil Spring | 1 | 1-26 | Safety Level Spring | 1 |
| 1-27 | Wag. Catch Spring | 1 | 1-28 | Trigger Spring | 1 | 1-29 | Barrel Seat Spring | 1 |
| 1-30 | Slide Stop Spring | 1 | 1-31 | Back Cover Spring | 1 | 1-32 | Axis | 1 |
| 1-34 | Axis | 1 | 1-35 | Axis | 1 | 1-36 | Axis | 2 |
| 1-37 | Axis | 1 | 1-38 | Screw | 7 | 1-39 | Screw | 2 |
| 1-40 | Screw | 2 | 2-01 | Slide | 1 | 2-02 | Slide(Back) | 1 |
| 2-03 | Front Sight | 2 | 2-04 | Piston Seat | 1 | 2-05 | Piston | 1 |
| 2-03 | Front Sight | 2 | 2-04 | Piston Seat | 1 | 2-05 | Piston | 1 |
| 2-06 | Front Fiber Optic | 1 | 2-07 | Front Fiber Optic | 2 | 2-08 | Screw | 1 |
| 2-09 | Screw | 2 | 2-10 | E Washer | 1 | 3-01 | Barrel Seat | 1 |
| 3-02 | Internal Barrel | 1 | 3-03 | C Washer | 1 | 5-01 | Mag. Body | 1 |
| 5-02 | Mag. Cover | 1 | 5-03 | BB Follower | 1 | 5-04 | BB Guide | 1 |
| 5-05 | BB Follower Seat | 1 | 5-06 | Mag. Base | 1 | 5-07 | Mag. Spring | 1 |
| 5-08 | BB Guide Spring | 1 | 7-01 | Valve Chamber | 1 | 7-02 | Valve Cover | 1 |
| 7-03 | Piercer Seal | 1 | 7-04 | Valve Seal | 1 | 7-05 | O-ring | 1 |
| 7-06 | O-ring | 1 | 7-07 | Piercer Fixing Ring | 1 | 7-08 | Filter | 1 |
| 7-09 | Piercer | 1 | 7-10 | Washer | 1 | 7-11 | Copper Ring | 1 |
| 7-12 | Valve | 1 | 7-13 | Valve Spring | 1 | 8A | Knob Combination | 1 |
| back to top | ||||||||
Safety Instructions
| Important: After the weapon has been used, follow these instructions: �Remove the magazine from the weapon, hold the muzzle into a safe direction and dry fire the weapon two or three times in order to make sure there are no BB's left in the gun. �Store the weapon at a place where children cannot gain access to it. | ||
 |  |  |
| Do not look directly into the gun barrel should a steal pellets accidentally be shot off | Never aim or shoot at people or animals. | Never shoot at hard surfaces in order to avoid ricochets and rebounds. |
 | Warning: Do not brandish or display this airgun in public - it may confuse people and may be a crime. Police and others may think this airgun is a firearm. Do not change the coloration and markings to make it look more like a firearm. That is dangerous and may be a crime. | Caution: Any changes or conversion of this weapon will lead to a different classification of the weapon in respect of the appropriate firearms legislation and are therefore illegal. In such cases, the manufacturer's warranty becomes immediately null and void. |
| Always wear safety goggles | ||