Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    UTG MK23 Navy Spring Pistol Owner's Manual

    UTG MK23 Navy Spring Pistol - SOFT-M23BH

    Weight: 1.3 lbs(600g )
    Magazine capacity: 25 rounds
    Fire mode: Manual cocking
    Safety: YES
    Caliber: 6mm
    UTG MK23 Navy Spring Pistol
    UTG MK23 Airsoft Spring Pistol Component Chart
    UTG MK23 Airsoft Spring Pistol Operationg the Safety/Fire Selector
    UTG MK23 Airsoft Spring Pistol Loading Pellets
    UTG MK23 Airsoft Spring Pistol Installing Mock Flash Suppressor - Optional
    UTG MK23 Airsoft Spring Pistol Firing
    UTG MK23 Airsoft Spring Pistol Maintenance
    UTG MK23 Airsoft Spring Pistol Warning

    UTG MK23 Airsoft Spring Pistol Component Chart

    UTG MK23 Airsoft Spring Pistol Component Chart Parts
    UTG MK23 Airsoft Spring Pistol Component Chart Parts UTG MK23 Airsoft Spring Pistol Component Chart Parts
    Warning! Before you follow the assembly instruction,make sure to remove the magazine and set the Fire/Safety Selector to the "Safe" position.
    back to top

    UTG MK23 Airsoft Spring Pistol Operationg the Safety/Fire Selector

    UTG MK23 Operationg the Safety/Fire Selector

    To set the Safety/Fire Selector on the "Safe" position, push the selector vertically all the way up(Fig 2.1)

    To set the Safety/Fire Selector on the "Fire position", push the selector vertically all the way down(Fig 2.2)

    Warning: Always use UTG Premium Precision Ground 6mm BB Pellets for accuracy and safety. Never re-use pellets.

    back to top

    UTG MK23 Airsoft Spring Pistol Loading Pellets

    MK23 Loading Pellets MK23 Loading Pellets

    Tip: For the magazine to work best with this pistol, do not load more than 26 pellets. If the pistol is cocked with an overloaded magazine, damage may occur to the guide rod and other internals. The easiest way to avoid overload is to fill the magazine to maximum capacity (27 BBs) and then remove one BB.

    Make sure to set the Safety/Fire selector on the "Safe" position

    Hold and disengage the magazine by pressing the Magazine Release Lever. (Fig 3.1)

    Push 6mm pellets into the magazine through the Pallet Drop. (Fig 3.2)

    Insert the loaded magazine back into the pistol.

    back to top

    UTG MK23 Airsoft Spring Pistol Installing Mock Flash Suppressor - Optional

    MK23 Installing Mock Flash Suppressor

    Align and screw the Mock Flash Suppressor into the Muzzle (Fig 4.1)

    back to top

    UTG MK23 Airsoft Spring Pistol Firing

    Warning: Activating the trigger carelessly is extremely dangerous. Never set the Safety/Fire Selector on the "Fire" position or put your finger on the trigger unless you are ready to shoot at a target.
    MK23 Firing

    Set Fire/Safety Lever to the "Fire" position. (Fig 5.1)

    MK23 Firing

    Pull the slide rearward all the way until it clicks, and push it back to the original position to complete cocking in one continuous movement.

    Hold the gun firmly and aim the airsoft pistol at your target. Pull the trigger to fire.

    back to top

    UTG MK23 Airsoft Spring Pistol Maintenance

    Keep the airsoft pistol in clean condition.

    Regularly clean the barrel with a soft cleaning rod.

    back to top

    UTG MK23 Airsoft Spring Pistol Warning

    Never look into the barrel with bare eyes.

    Never point the gun to another person within shooting range.

    Do not shoot at any target with hard surface within close range. Ricocchet pellets may injure yourself.

    Do not brandish in public, do not alter the coloration and warning-such an action is dangerous and may be a crime.

    back to top
    Shop at Gun Mall
    Back to Top