Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    FREE USA GROUND SHIPPING
    Continental USA. On orders $150 and up
    Cannot be combined with coupons.

    WE Hi-Capa 5.1 Full Metal Airsoft Gas Pistol Owner's Manual

    WE Hi-Capa 5.1 Full Metal Airsoft Gas Pistol manual

    Description

    Caliber: 6mm
    Velocity: 290-310 fps with 0.2g BBs
    Loudness: 3-Medium
    Overall Length: 9.0
    Shot Capacity: 30
    Barrel: Smooth bore
    Front Sights: Blade and Ramp
    Rear Sights: Adjustable
    Action: Semiautomatic
    Safety: Manual
    Power Plant: Gas
    Hop Up: Adjustable
    Blowback: Yes
    Material: Full metal
    Ammunition: 0.2-0.25g
    Body Type: Pistol


    Click here to check availability and price of this item

    WE Hi-Capa 5.1 Full Metal Airsoft Gas Pistol Parts
    WE Hi-Capa 5.1 Airsoft Gas Pistol Gas Injection. Loading BB Bullet
    WE Hi-Capa 5.1 Airsoft Gas Pistol Loading & Releasing The Magazine. First Load For Firing
    WE Hi-Capa 5.1 Airsoft Gas Pistol Safety Operation
    WE Hi-Capa 5.1 Airsoft Gas Pistol Shooting
    WE Hi-Capa 5.1 Airsoft Gas Pistol Shooting Process
    WE Hi-Capa 5.1 Airsoft Gas Pistol Application Of HOP UP
    WE Hi-Capa 5.1 Airsoft Gas Pistol Sighting Device Adjustment
    WE Hi-Capa 5.1 Airsoft Gas Pistol After Shooting
    WE Hi-Capa 5.1 Airsoft Gas Pistol Disassembly And Basic Maintenance
    WE Hi-Capa 5.1 Airsoft Gas Pistol Trouble Resolution
    Warning

    WE Hi-Capa 5.1 Full Metal Airsoft Gas Pistol Parts

    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Gas Injection. Loading BB Bullet

    To refill the gas with the gas container in vertical position. Load BB bullet in the magazine, 6mm (30 rounds only).Please follow the illustrative sequences to load the BB bullets.
    Caution
    Please do not use the BB bullets that are over 6mm,rough on surface or have been used.

    WE Hi-Capa 5.1 Airsoft Gas Pistol Loading & Releasing The Magazine. First Load For Firing

    While loading the magazine, push it inward to the bottom till a "tick" sound is heard.Press the magazine release catch, the magazine will fall off from the stock.
    Attention: use hand to receive the magazine to prevent it from falling down to the ground.
    Pull the slide backward to a specific position, then release and let the slide moving forward to load the bullet in the firing chamber, and retain the hammer at the rear position, ready for firing.

    WE Hi-Capa 5.1 Airsoft Gas Pistol Safety Operation

    Hammer can only work when the safety stays at "Full Lock" position. Don't operrate the trigger when the safety is at "ON" position. Otherwise, they may be damanged. Warnings: Ensure the safety to stay at ON when it is unused. Under this state, the shooting is out of availability. Finger the hammer to Full Lock or pull the slide to make shooting. Half Lock is referred to that the hammer stays between the Full Lock and Hammer Down. Under this state, it is of safety.

    This safety function can be applied automatically and grip the apron block tightly to release it (push it in toward the gunpoint) and the trigger will withdraw.


    Warnings: Don't pull the trigger if the Grip Safety hasn't been pushed in, otherwise it may be damaged.

    WE Hi-Capa 5.1 Airsoft Gas Pistol Shooting

    When the slide is pulled back and released forward, the bullet is loaded in the firing chamber, press the trigger to fire the loaded Bullet.
    Attention: The maximum containment for a magazine is 30 rounds.
    After the last BB bullet is fired, the slide will be retained in the back position, it means an empty magazine condition.If you want to resume the firing,insert a new fully loaded magazine,press the slide stop to re lease the slide and to reload the bullet.
    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Shooting Process

    After a long and continued firing practice, the low temperature of the magazine will cause a reduced gas pressure as well as the low Velocity of bullet. lt is a normal condition, not a trouble. Never practice the reverse firing because which action cause the gas can't evaporate and the vapor easy to damage the parts.
    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Application Of HOP UP

    The adjustable Hop up system can make the trajectory of BB bullets slightly adjustable, and compared with the launcher which makes bullets moving at a parabola trajectory, it can aim at a farther target and shoot the bullets for a long range. Unlike the fixed one, the Hop turntable and Hop Pole can be adjusted slightly by a light touch. It is a perfect Hop up System.

    Adjust the Hop up in 1 - 5 order.
    Turn the Hop Turntable slowly towards the hop direction till the BB bullets can be shot horizontally.
    Too tightness will cause a poor shooting, so, complete the adjustment till the trajectory is horizontal.
    Forceful turn of the Hop Turntable to a certain degree may cause damage.
    Notice: The bullets may be released from the bore while slightly loose the hop turntable Please fasten the hop turntable slightly in case of this situation. It is arising from the withdrawal of the BB bullet shield not the fault.
    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Sighting Device Adjustment

    Aim it as the figure shows, adjusting the rear sight to make bullets hit sharply the target center. It would be better to adjust it on the basis of the average after shooting several bullets.
    To aim the left, turn with a right-angled screwdriver the right screw on the rear sight rightward. It would be deflected to the left if rotate it leftward.
    To aim the lower position, turn with a right-angled screwdriver the top screw on the rear sight upward (left). It would be deflected to the lower if rotate it downward (right)
    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol After Shooting

    After the firing practice, take off the magazine from the stock, push down the slide stop to hold the slide in place and press the trigger to release the hammer.
    Attention: Take out any bullet that is inside.
    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Disassembly And Basic Maintenance

    back to top

    WE Hi-Capa 5.1 Airsoft Gas Pistol Trouble Resolution

    Condition Causes Correction
    No action Safety is locked Release the safety
    Too much gas Press the refill inlet or the drain valve to break out an adequate amount of gas. Caution: Never aim the discharged gas to a Are, animal or person.
    Insufficient gas filled or at a very low temperature. Inject an adequate amount of gas into the gun.
    Unknown reason Please contact our distributor.
    The B6 bullet does not eject out of the barrel Deformed BB bullet Use the standard BB bullet only
    The barrel is clogged with extraneous material Remove the extraneous material from the barrel.
    The slide falls to return to the position An extraneous material jams at the front end of the barrel Remove the extraneous material
    The motion of the slide Is not smooth while firing BB bullet The ambient temperature is too low (in winter) Place the magazine indoor to recover the temperature. It Is recommended to prepare two magazines.
    Insufficient gas in the magazine (A long and continued firing causes quick cooling and frozen)
    Low gas pressure in the magazine Refill the gas
    The trigger mechanism is out of work Please contact our distributor.
    The air-tight rubber seal is worn out or damaged
    Poor lubrication Poor use adequate lubricating oil.
    Short projectile The rubber seal Is damaged Please contact our distributor.
    The spring fatigue
    The gas discharging mechanism Is broken
    back to top
    Explosion

    Warning

    Be sure to wear shooting glasses or Goggle when shooting Put the gun beyond the reach of kids Don't peep at the muzzle.
    Don't aim at people even if it is unloaded. Don't touch the trigger until the moment of shooting. After making sure that there is nobody nearby.
    Avoid a rough operation. When the gun is not in use, remove the magazine and unload BB pellets.
    back to top


    Over
    ammo packs sold