Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    FREE USA GROUND SHIPPING
    Continental USA. On orders $150 and up
    Cannot be combined with coupons.

    Main Operating Loading To Charge The Rifle Adjustments Safety

    To Remove the Magazine
    • The magazine clip is located on the top side of the rifle�s receiver.
    • Before proceeding, keep the rifle pointed in a safe direction at all times.
    • To remove it from the rifle, cock the rifle . DO NOT RETURN THE LEVER TO THE CLOSED POSITION. Leave it in it�s open (half -cocked) position. Pull magazine out from the breech.


    To Feed Pellets from the Magazine:
    • Before proceeding, keep the rifle pointed in a safe direction at all times.
    • Engage the safety.
    • Cock the rifle. Leave it in it�s open (half -cocked) position.
    • Insert the loaded magazine.
    • Return the lever to its closed position
    • Release the safety. The rifle is ready to fire.


    To Clean the Barrel:
    • If the groups you shoot are off, the barrel probably needs cleaning,
    • Before proceeding, keep the rifle pointed in a safe a direction at all times.
    • Engage the safety.
    • Remove the magazine.
    • Do not clean the barrel under charge. Empty the rifle's air pressure, completely by dry firing it in a safe direction. It is best to clean the rifle when the rifle's air pressure is already low so you won't have much air to discharge.
    • Do not use wood doweling for a cleaning rod. A broken rod in the barrel is extremely difficult to remove. A coated metal rod designed for cleaning air gun works best,
    • Saturate the, cloth patches with cleaning fluids or lubricants designed for air gun barrels.
    • Using the cleaning rod, push the saturated cloth patch through the muzzle, until it exits at the other and.
    • There is no need to over-clean the barrel. Swab the barrel s bore with cloth patches until the last one comes out clean.
    • Never use an abrasive cleaning agent or metal brush.


    To Clear the Barrel of a Jammed Pellet(s):
    • Before proceeding, keep the rifle pointed in a safe direction at all times,
    • Engage the safety.
    • Cock the rifle . DO NOT RETURN THE LEVER TO THE CLOSED POSMON. Leave it in open (half-cocked) position.
    • Remove the magazine.
    • Use a metal rod designed for cleaning air gun�s to clear the barrel. Push it through from the muzzle to the other end. The jammed pellet should come out.
    Dry Firing the Rifle:
    Dry firing it does not harm this rifle.


    Main Operating Loading To Charge The Rifle Adjustments Safety

    Shop at Gun Mall
    Back to Top