Subtotal:
    does not include shipping and tax

    Subscribe

    Join the Pyramyd Air mailing list today and receive a 5% off coupon code to be used on your next purchase.
    Stay abreast of air gun news, articles, and receive valuable promotions!

    We will NOT sell your email address to anybody!

    • Exchange/Refund policy

      Return any item in new
      condition for a refund or exchange.
      Click for details

    • Shipping timeframe

      Order by 12 noon Eastern, and we'll ship it that day!Click for details

    • Warranty period

      One year manufacturer's warranty on most items. Click for details

    • Service

      Airgun or airsoft gun need to be fixed? Our full-service repair shop can do it! Click for details

    • Free shipping

      Free ground shipping for orders over $99! Click for details

    Warning!
    You must be 18 years or older to buy any air gun or air rifle in our store
    Shipping Restrictions
    Home
    Air Gun Manuals
    challenger2000/loading.shtml
    Main Operating Loading Firing Adjustments Safety

    Loading Pellets
    • Put the air rifle "On Safe."
    • Point the air rifle in a SAFE DIRECTION.
    • Cock and open the bolt by squeezing the bolt latch to unlock and pulling the bolt handle all the way back until you hear two clicks and the bolt stays rearward.
    • Place one pellet, nose first, into the loading port (breech)(Fig 4). This is a single shot pellet rifle. Load no more than one pellet at a time.
    • Lightly push the pellet into the barrel by closing the bolt and returning the bolt handle all the way forward until you have heard two clicks. DO NOT jam the bolt forward. This will damage your air rifle.
    • Be sure the bolt is fully closed and locked into position before firing. If it is not closed and fully locked, the pellet may not be discharged.


    Unloading Pellets NOTE: The air rifle must be charged with CO2 when following thse steps, but remember, do not store our air rifle with a full CO2 cartridge.
    • Aim the air rifle in a SAFE DIRECTION, take it "Off Safe," cock and close the bolt, and squeeze the trigger to fire. You may also unload your air rifle by following the directions listed under Removing a Jammed Pellet.

    Removing a Jammed Pellet
    • Do not reload the air rifle.
    • Put the air rifle "On Safe."
    • Empty and remove the CO2 cartridge.
    • Open the bolt.
    • Insert a ramrod of the proper size into the barrel. (Start at the muzzel).
    • Push the jammed pellet into the pellet loading port (forward of the bolt )(Fig 8).
    • Do not try to reuse that pellet.
    • If you are not able to unjam your air rifle by following the unloading procedure, take no further action. Crosman Corporation or an Authorized Service Station will unjam your air rifle.


    Main Operating Loading Firing Adjustments Safety

    Over
    ammo packs sold