Adjusting Loading Main Safe handling of your pistol
It is your responsibility to be familiar with the safe and correct use of your pistol.
Operation of the decocking lever
- Always handle your pistol as if is loaded.
- When loading your pistol, insure that the safety is ON, and do not put your finger near the trigger.
- Use only the recommended Pellets and CO2 cartridges.
- Always point the muzzle in a safe direction.
- Remember that this is a high efficiency pistol capable of propelling a pellet over 400 yards.
- Always check a gun to see if it is loaded when removed from storage or received from another person.
- Never transport your pistol when loaded.
- Do not aim at people or pets. Never shoot at a hard surface or water.
- Be sure that your target and backstop are safe.
- Make sure you can control the direction of the muzzle if you stumble or fall.
- Unload your airgun before giving it to another person.
- Always wear shooting glasses when shooting your pistol.
- Always store your pistol in a secure location out of the reach of children or unskilled users.
- Store your pellets and C& cartridges in a separate location.
- When transferring this pistol be sure to include this instruction manual.
- Repairs to this pistol should only be done by Walther authorized service.
- Never leave a loaded gun unattended.
Press the decocking lever down as illustrated in fig. 1. This decocks the hammer and moves it to the safety notch.Exchange of backstrap
Remove the pin according to illustration 2 and remove the backstrap from the bottom of the grip.Use of the safety
a) To engage the safety, push the safety to the forward position as shown in illustration 3. (red marking not visible)
b) When handling this gun the safety should be ON and the
muzzle pointed in a safe direction.
c) To disengage the safety, push the safety to the rearward position (red marking visible). The pistol is now ready to fire (illustration 4).WARNING:
We recommend that the safety lever always
be in the "SAFE" position until you intend to shoot. Use and handling Of CO2 cartridges
Certain conditions such as improper storage or very rapid firing can negatively effect the efficient performance of your CO2 pistol.
1. Do not store your pistol in an area of unusually high or low temperature. High temperature can cause incresed pressure in the CO2 cartridge leading to a malfunction or permanent damage to the pistol. Low temperatures can reduce pressure in a CO2 cartridge leading to weak shots. Do not leave your gun unattended in bright sunlight. The C02 cartridge can get too hot and explode, damaging the gun and injuring or killing anyone nearby.
2. Rapid-fire shooting will quickly chill a CO2 cartridge leading to reduced pressure and pellet velocity.
3. Rapid fire shooting leads to reduced shooting efficiency.
4. As the cartridge loses pressure you will notice several characteristics:
A) The sound of the actual shot will not be as loud.
B) Pellet impact will be lower on the target. Adjusting Loading Main