Main  Adjusting  Loading  Cleaning  Safety

Trigger adjustment

This gun is supplied with a trigger with an adjusting screw for second stage length . Adjusttnent is carried out as follows: for reduction -rotate screw clockwise, for increase -rotate screw counter-clockwise.

Elevation adjastment

If the shot too high, turn the screw 2 clockwise. If the shot is too low, turn the screw counter-clockwise.


Changing the position of the sight

On some rifle models, the sight has a part with 4 interchangeable position. Undo the screw 3 until the sight rotates outside its housingtop. Tighten screw 3 up again while holding the sight with your other hand until it slots back into the sight-holder.

Windage adjustment

To correct a gun shooting to the right. turn the rearsight windage screw anti-clockwise to move the blade to the left. To correct a gun shooting to the left, turn the rearsight windage screw clockwise to move the blade to the right.

Main  Adjusting  Loading  Cleaning  Safety

Navigation