MAIN  FIRING  LOADING  SAFETY RULES  ADJUSTING  OPERATION

FIRING This is a single and double-action pistol.
WARNING: Do not place your finger on the trigger until you are pointing at a safe target. To shoot in single action, apply the safety catch, cock the hammer, point at the target, remove the safety catch, now place your finger on the trigger and fire. To fire in double action, apply the safety catch, point at the target, remove the safety catch, now place your finger on the trigger and fire up to 8 consecutive times.
CAUTION:Make sure that the C02 bottle has enough gas left in it to propel the pellet out of the barrel. Do not use the bottle until it is completely empty, but change it after 60 shots or if you notice the pressure dropping between shots.

CLEANING WARNING:Make certain the pistol is unloaded and the safety in "ON" before cleaning.
Use a 4,5 mm or. 177 caliber cleaning rod, rod tip, patches, and bore brush with gun solvent and oil to clean your pistol. Insert the cleaning rod with cleaning attachments from the muzzle. It is helpful if you occasionally apply special GAMO airgun oil to the metal parts of the airgun.

MAIN  FIRING  LOADING  SAFETY RULES  ADJUSTING  OPERATION