Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    Main Operating Loading Firing Adjustments Safety

    Sight Adjustment
      Model RM577/RM777/RM522/RM622: The rear sight may be adjusted to shoot higher or lower (elevation). Loosen the elecatin slide lock knob by turning it counterclockwise. Then, turn the elevation knob counterclockwise to make the pellet hit higher on the target. Move the elevation knob clockwise to make the pellet hit lower on the target. Then, lock the elevation slide in polace by turning the elevation slide lock knob clockwise (Fig. 5a).

      The rear sight can also be adjusted to shoot left or right (windage.) Turn windage knob counterclockwise to make the pellet hit to the left on the target. Turn the windage knob clockwise to make the pellet hit to the right on the target (Fig. 5a).


      Model RM277/RM377: The rear sight may be adjusted to shoot higher or lower (elevation). Move the rear sight elevator back to make the pellet hit higher on the target. Move the rear sight elevator forward to make the pellet hit lower on the target. When moving the elevator, slightly lift the rear sight and reset it on the desired notch in the elevator (Fig. 5b).

      The rear sight may also be adjusted to shoot right or left (windage). Loosen the windage adjustment screws by turning them counterclockwise with a 3/32" hex wrench. Move the sight to the right to make the pellet hit to the right on the target. Move the sight to the left to make the pellet hit ot the left on the targer. Then tighten the windage adjustment screws by turning them clockwise (Fig 5c).


    Main Operating Loading Firing Adjustments Safety

    Shop at Gun Mall
    Back to Top