SIG Sauer P226 Owner's Manual


TECHNICAL DATA


Power source Spring Powered
Caliber/Ammunition 6mm Round BBs
Magazine capacity 17 BBs
Total length 7.6 inches (19.3 cm)
Weight 1.7 lbs. (.771 kg)
Velocity 230 fps w/ 0.12g
Scale 1:1



NOTICE FOR USE
Dissasembling (taking apart) this soft product voids all warrant. Product must be returend in its original packaging.
Federal law prohibits altering or removing the orange marking or painting over the transparent part of this product.
Do NOT use 6mm paintballs with this airsoft unit as this may ruslt in jamming and will void warranty.

-Store the gun unloaded and do not look down the barrel (treat as if loaded).

-Never aim at a person, shoot fragile objects, or point at anything you do not wish to shoot.

-Keep finger off the trigger until ready to shoot and use eye protection

-Keep out of reach of children.

-Only use .12 g and .20 g BBs

INSTRUCTIONS
Pictures are not contractual. Pictures shown with a black model but representation and understanding remain similar with all black, silver, gold, and/or clear version series.

(1). To remove the magazine press the release (1) located on the left side of the grip. Slide magazine out.

(2).(3).(4). Load the magazine with the appropriate ammos (one by one, or with a Speed Loader, not included). The maximum capacity is 17 rounds.



(5). Insert magazine in receptacle.

(6). In order to fire, you have to cock the gun: pull the slide backwards as shown and release.

(7). Move the cursor to adjust Spin Up firing system. Adjust according the weight of BBs used.

(8). Pull the trigger.

(9). Once finished shooting make sure the gun is stored empty of any ammuntion, magazine approved.



Navigation