The Sport Owners Manual

Introduction:
The Sport is a spring operated break action air rifle and is fitted with a precision rifled steel barrel. The air rifle is available in .22 caliber and is designed for use with waisted lead pellets.
A wide selection of pellets is available from Webley & Scott International Ltd. The use of steel darts may damage the barrel rifling.
The Sport features a two - stage trigger unit, with automatic safety catch and a mechanism which prevents the trigger from being accidentally pulled when the barrel assembly is in the open position. Adjustable open sights are fitted as standard.

Cocking and Loading:

With an open hand, tap the barrel downwards to release the barrel lock. Pull down on the barrel as far as it will go-the safety catch situated in front of the trigger will automatically engage and prevent the trigger from being pulled.
ALTHOUGH THE SPORT IS FITTED WITH A SAFETY MECHANISM KEEP FINGERS AWAY FROM THE TRIGGER DURING LOADING!
Whilst holding the barrel open, push a pellet flush into the breach and return the barrel to its closed position.
Ensure the area behind the target, is clear and a suitable pellet backstop is used,
Push the safety catch fully forward only when you intend to fire the rifle. If you wish to re-apply the safety, catch it will be necessary to recock the barrel assembly.
Aim the rifle at the target and squeeze the trigger to fire.

Adjusting the open sights:

Always use the same point of aim during adjustment, regardless of the resultant point of impact. Shoot at least five shots between adjustments using the average of the group for reference.

Elevation Adjustment.

To correct a group shooting low, raise the rearsight by turning the elevation screw counter clockwise.
To correct a group shooting high, lower the rearsight by turning the elevation screw clockwise.

Windage Adjustment.

To correct a group shooting left, turn the rearsight windage screw clockwise to move the rearsight blade to the right.
To correct a group shooting right, turn the rearsight windage screw counter clockwise to move the rearsight blade to the left.