Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    FREE USA GROUND SHIPPING
    Continental USA. On orders $150 and up
    Cannot be combined with coupons.

    Main Operating Loading To Charge The Rifle Adjustments Safety

    To Remove the Magazine
    • The magazine clip is located on the top side of the rifle�s receiver.
    • Before proceeding, keep the rifle pointed in a safe direction at all times.
    • To remove it from the rifle, cock the rifle . DO NOT RETURN THE LEVER TO THE CLOSED POSITION. Leave it in its downward (half-cocked) position. Pull magazine out from the breech.


    To Feed Pellets from the Magazine:
    • Before proceeding, keep the rifle pointed in a safe direction at all times.
    • Engage the safety.
    • Cock the rifle. Leave it in its downward (half-cocked) position.
    • Insert the loaded magazine.
    • Return the lever to its closed position
    • Release the safety. The rifle is ready to fire.


    To Clean the Barrel:
    • If the groups you shoot are off, the barrel probably needs cleaning,
    • Before proceeding, keep the rifle pointed in a safe a direction at all times.
    • Engage the safety.
    • Remove the magazine.
    • Do not clean the barrel under charge. Empty the rifle's air pressure, completely by dry firing it in a safe direction. It is best to clean the rifle when the rifle's air pressure is already low so you won't have much air to discharge.
    • Do not use wood doweling for a cleaning rod. A broken rod in the barrel is extremely difficult to remove. A coated metal rod designed for cleaning air gun works best,
    • Saturate the, cloth patches with cleaning fluids or lubricants designed for air gun barrels.
    • Using the cleaning rod, push the saturated cloth patch through the muzzle, until it exits at the other and.
    • There is no need to over-clean the barrel. Swab the barrel s bore with cloth patches until the last one comes out clean.
    • Never use an abrasive cleaning agent or metal brush.


    To Clear the Barrel of a Jammed Pellet(s):
    • Before proceeding, keep the rifle pointed in a safe direction at all times,
    • Engage the safety.
    • Cock the rifle . DO NOT RETURN THE LEVER TO THE CLOSED POSITION. Leave it in if s downward (half-cocked) position.
    • Remove the magazine.
    • Use a metal rod designed for cleaning air guns to clear the barrel. Push it through from the muzzle to the other end. The jammed pellet should come out.
    Dry Firing the Rifle:
    Dry firing it does not harm this rifle.


    Main Operating Loading To Charge The Rifle Adjustments Safety



    Over
    ammo packs sold