| Taurus PT99 Instructions Taurus PT99 Bax Shooting System Taurus PT99 Caution Taurus PT99 Warning |
| ![]() |
| To remove the magazine, press the release button (1) located on the left side of the grip. Slide the magazine out (2). | Unscrew the bottom of the magazine with the tool (or a coin) provided in the kit. |
| ![]() |
| Insert the CO2 cartridge in the magazine as shown on the picture. | Screw the bottom of the magazine. When pressure starts increasing in the magazine (expansion of the CO2 in the magazine can be heard), finishing screwing rapidly. Very important: do not tighten excessively, it could permanently damage the O' rings. |
| back to top | |
| ![]() |
| Fill the magazine with the appropriate 6 mm plastic BBs. Works best with Cybergun Expert BB's. The maximum capacity is 38 rounds. Place the BBs as indicated. | Push the magazine until the click sound. |
| ![]() |
| Engage first BBs by pulling the slide back, then release. CAUTION: never aim at a person, never fire at a hard surface at close range: pellets will be rebound. | To start shooting, aim at a target, put the selector (1) on the "semi" or "auto" position (according your version). Pull the trigger (2). |
| back to top | |
| ![]() |
| This softair is equiped with an internal slide lock. When the magazine is empty, it will stop fire, and the slide will stay lock back. Push on the stopper to unlock the slide (1). | Once finished shooting, put the shooting selector back on the "Safe" position. Make sure the rifle is stored empty of any ammunition, magazine removed. |
| back to top | |
| ![]() | ![]() |
| To adjust the BAX System, you have to remove the slide from the main frame. First, remove the magazine. Then, push the release as shown on picture (1) and at the same time, turn down the lever as shown on the picture (2). Pull the slide back and push frontward to remove it. | ||
| ![]() | ![]() |
| Adjust delicately the BAX with a screw driver as shown on the picture, according weather conditions and weight BBs. Take care to not overtight. | To put back the slide on the gun, slide in its slots. Make this operation with elements back to front as indicated on our pictures. | |
| ![]() |
| According to the productions, the lock (and/or opening) of the magazine base for the models CO2 can be made, either with an Allen key (A), or with a metal spatula (B). Both systems have similar use. The corresponding tool is always supplied in the box. | |
| back to top | |
|
| This product is an airsoft airgun, it is to be purchased by person(s) age eighteen (18) years or older. Adult / parental supervision is required when used by any person under age of eighteen. Be responsible, check with your local law enforcement on airsoft airgun regulations. Please read the operation manual and fully understand the safe handling of your airsoft airgun before use. Pay special attention to your surrounding when using your airsoft airgun. Do not carry your airsoft airgun in public, in open view or concealled. Transport your airsoft airgun unloaded, in locked gun carrier / case. Do not brandish, point, or shoot at other people, animal, or private properties. Such actions may be preceived by others (including law enforcement officer) as a threat and prompt to react accordingly. U.S. federal regulation requires the orange marking, do not remove, alter or impair marking. All warranty void if markings(s) are tempered. This airsoft airgun is for safety & handling training purpose, movie and theatrical production application, regulated airsoft sport at participating playing field and shooting range. Ask your airsoft dealer for details. Store your airsoft airgun unloaded, remove batteries, discharged of any gas or spring tension. In a safe and locked location; out of the reach of children. |
| back to top |