Walther Twin-CO2 Air Rifle
OWNER'S MANUAL


Main  Adjusting  Loading  Technical Service  Safety

Adjustment

Sight Adjustment
The rear sight may be adjusted to shoot higher or lower.
Elevation Adjustment: Move the rear sight blade forward to make the pellet hit lower on the target. Move the rear sight blade back to make the pellet hit higher on the target. When moving the elevator, slightly lift the rear sight and reset it on the desired notch in the elevator (Fig. 17).
Windage Adjustment: This adjustment is made by shifting the front sight blade. NOTE: The front sight protection hood on the Long Version Lever Action Rifle has to be removed prior to this operation
(Fig. 18).
Point of impact too far to the right: Shift front sight blade to the right
Point of impact too far to the left: Shift front sight blade to the left

Main  Adjusting  Loading  Technical Service  Safety

Navigation