- Home
- Customer Reviews
Air Venturi PCP Scuba Charging Set reviews - page 1
Create an online reviewand share your thoughts with other customers
| The most favorable review | The most critical review | |
|---|---|---|
0 of 0 people found the following review helpful:
By David from USA on 2009-11-03 22:28:09 Things I liked:I especially like the way the Pressure Indicator can rotate so that there is absolutely no interference operating the valve on the scuba tank.Things I would have changed:The pressure is given only in bars. Dual readout showing bar and psi would be better. What others should know:Is a good buy! |  |
0 of 0 people found the following review helpful:
By tom from USA on 2011-12-20 08:37:58 Things I liked:Scuba fitting was well built.Things I would have changed:Hose leaks, way too short. What others should know:Returned due to defective and too short hose. |
- Things I liked:This is a quality piece of equipment and will make filling those bigbore air guns easy. Is good for smaller calibers, be careful and watch your gauges and everything will be fine. If you want a "scuba" quality gage this fits the bill nicely. Great quality.
Things I would have changed:It would be nice to have instructions. I'm a respiratory therapist so I knew how to attach the charging set to the tank.
What others should know:Be sure and tighten probe with wrenches. Finger tight will not work and an air leak will result when probe and fill hose adaptor are not completely mated. - Things I liked:The construction and finish is very high quality. Has a nice quality feel to it
Things I would have changed:Change pressure gauge to one that reads in PSI instead of BAR
What others should know:The gauge units are BAR and not PSI which is what the gun shows and my high pressure Scuba gauge shows. I created a little p-touch label with a conversion table for quick reference. Here are the values if interested: 3000 PSI = 206 BAR 2800 PSI = 193 BAR 2000 PSI = 137 BAR 1800 PSI = 124 BAR - Things I liked:Scuba fitting was well built.
Things I would have changed:Hose leaks, way too short.
What others should know:Returned due to defective and too short hose. - Things I liked:the good grade of metal work. works ok for the price.
Things I would have changed:the gauge- its plastic cover pops out treat with care.
What others should know:beware this charger comes with NO instructions. i found out the hard way the bleed valve screw- if you take it out all the way a steel BB inside will fall out its small & hard to find i sweated the search. - Things I liked:the metalwork is grade A the pressure gauge is not the same but its funtional, dont drop it, its plastic.the rest is very well made scuba quality equpment. good deal for the price. im happy with the product.
Things I would have changed:pyramyd has to package it better mine came with the gauge not functional because of damage during shipment it was only wraped in buble wrap when a heavy item like this one needs a small box of its own
What others should know:mine seal to the tank very well and the knob is very precise. - Things I liked:Fills my air rifle as advertised. I found the guage to be accurate to what the manometer on my rifle says.
Things I would have changed:i would like both BAR AND Psi readings. This guage only reads in BAR. Not really all that big a deal but would be nice.
What others should know:Leaks a bit at high pressure.. can hear it hissing out from where it attaches to the Yolk, just in front of where it attaches to the tank. I expect some teflon tape will cure that. leak is slow and still fills my rifle. - Things I liked:Makes a PCP very easy to fill.
Things I would have changed:A gauge that would tell you pressure in the scuba tank would be great. - Things I liked:Fits very easy on my k valve scuba tank. The gauge is accurate and easy to read. bleed valve is easy to use
Things I would have changed:I would sell it with an assortment of connecters for different guns
What others should know:works well, strong and heavy,easy to maintain - Things I liked:Metal parts are high quality.
Things I would have changed:Plastic around gauge came cracked in the box, and I think it happened during packing. - Things I liked:After using the hand pump, I was glad to get this unit. It connected up ok; it did required some tightening but sealed well enough to deliver 200 bar for my 909s. Glad I got it!
Things I would have changed:I would like a guage that shows psi along with bar. I had to do some calculating to make sure I deliverd the proper pressure.
What others should know:I think the best way to charge my 909s was to stand the rifle up next to the tank leaning the rifle back to match the height of the tank. - Things I liked:Not much. Leaked and chrome peeled on day one. It was returned.
Things I would have changed:The mfg or Pyramyd should pressure test before shipping the assembly out.
What others should know:Buy the Kingman PCP charging set instead. - Things I liked:excellent SCUBA quality adapter. GREAT VALUE
Things I would have changed:longer fill whip, making pre-charging easier
What others should know:These are High Pressure air fittings and should be used with extreme caution. All air rifles should be very slowly charged...VERY SLOWLY. HIGH PRESURE AIR is dangerous. Most all SCUBA divers know this and I would expect they do use extreme caution. These adapter from the SCUBA industry cost over $125.00 - Things I liked:I like that the Pressure Indicator can rotate, so that you're able to find that perfect placement, with no interference in operating the valve on the scuba tank.
Things I would have changed:Pressure is given in bars only. This is NOT a problem for my AA S410 Xtra Fac, as my read out on the gun is in Bar. If you need a dual readout you can easily replace the gauge.
What others should know:Looks much better than my neigbours.....LOL Cheers, Mark - Things I liked:I finally got the valve to charge my new Marauder without leaking pressure through the bleed off valve.
Things I would have changed:I would put on a hose about half of this ones normal length or less to make filling airguns easier. There should be a 5000psi guage on the charging valve, so you could see exactly what the pressure is going on with the tank and in your airgun. I would have quality control to make sure that all of the machine work is within specification especially the bleed valve seat.
What others should know:If you have a problem with the bleeder valve not sealing ( leaking pressure through the bleeder hole). Call Pyramyd they will help you get it sorted out. - Things I liked:Sturdy, easy to use.
Things I would have changed:not much, works fine for me. - Things I liked:I especially like the way the Pressure Indicator can rotate so that there is absolutely no interference operating the valve on the scuba tank.
Things I would have changed:The pressure is given only in bars. Dual readout showing bar and psi would be better.
What others should know:Is a good buy!
| Show: | Items |
Overall rating:5 5.0
Value for money:4 4.0
See all my reviews
Things I would have changed:For the price it should come with the fitting you need for the gun you have instead of trying to figure it out after the fact.