BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, .007 Drop Compensation, Matte Black reviews - page 1

Average Customer Review

5.0 (3 reviews)
5 star:4 star:3 star:2 star:1 star:
(3 votes)
Add to CartIn-stock
Create an online reviewand share your thoughts with other customers

The most helpful favorable review

1 of 1 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By helibrown from USA on 2011-05-03 19:15:34

Things I liked: This is a mount! Strong,big headed screws,compensation works. Mounted on a Daisy 853C for a benchrest, scoped, indoor air gun 10 meter league. Helps to clear loading ramp for big hands and center the scope clicks. (Have enough up clicks to get on target)

Things I would have changed: BKL makes a nice level that screws into this mount for leveling the gun but only mounts on left side (not good for left handed shooters) . Screw holes only on left side. BKL should left hand it too......for their nice BKL level. See notes below.......

What others should know: Picture is in error and miss leading to all shooters. That would be a left handed mount that is not made. (rev- image?)

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:4.0

By Asger from Denmark on 2012-04-24 16:49:34

Things I liked: Sturdy quality, feels like the scope is locked rock solid in the mount.

What others should know: The free-hight for the scope's turret house is 1/10 of an inch. No more, my Nikko Stirling Nighteater has a 3mm house. Had to mill approx. 0.7mm off the top of the mount to fit the scope (so it was not resting on the turret house). But the mount is aluminimum so milling is no problem - but check your turret house clearence before buying if you do not want to mess with custom fitting. The product image is inverted - the screws and tapered holes are done from the right side of the mount. This means if you want to add bubble lever then it sits on the "wrong" side if you are a right hand shooter - again nothing that cannot be fixed by some custom work, but still.

Sort by:
  • Showitems
  • 5.0 5.0

    4.0 4.0

    By Asger from Denmark on 2012-04-24
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Sturdy quality, feels like the scope is locked rock solid in the mount.

    What others should know: The free-hight for the scope's turret house is 1/10 of an inch. No more, my Nikko Stirling Nighteater has a 3mm house. Had to mill approx. 0.7mm off the top of the mount to fit the scope (so it was not resting on the turret house). But the mount is aluminimum so milling is no problem - but check your turret house clearence before buying if you do not want to mess with custom fitting. The product image is inverted - the screws and tapered holes are done from the right side of the mount. This means if you want to add bubble lever then it sits on the "wrong" side if you are a right hand shooter - again nothing that cannot be fixed by some custom work, but still.

  • 5.0 5.0

    5.0 5.0

    By helibrown from USA on 2011-05-03
    See all my reviews
    Was this review helpful?
    5.01 rating

    Things I liked: This is a mount! Strong,big headed screws,compensation works. Mounted on a Daisy 853C for a benchrest, scoped, indoor air gun 10 meter league. Helps to clear loading ramp for big hands and center the scope clicks. (Have enough up clicks to get on target)

    Things I would have changed: BKL makes a nice level that screws into this mount for leveling the gun but only mounts on left side (not good for left handed shooters) . Screw holes only on left side. BKL should left hand it too......for their nice BKL level. See notes below.......

    What others should know: Picture is in error and miss leading to all shooters. That would be a left handed mount that is not made. (rev- image?)

  • 5.0 5.0

    5.0 5.0

    By cbrpilot from USA on 2010-12-19
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Droop worked as advertised, mount centered exactly on the dovetail, very solid, and the base and rings use the same size hex screws, so you don't have to mess with two different ones when you're making adjustments.

    Things I would have changed: It would be nice if they offered this with double strap rings like the other BKL's, but it still works fine.

    What others should know: This mount only goes one way because of the droop; the clamp is in the front, the floating ring is in the back. I bought this thinking it was a standard cantilever design, so I could mount my scope more forward, but it's not designed that way. Still, mounted as designed it let me mount a Elite 4200 6-24x40 AO on the short rail of an FWB300S comfortably.

Navigation