Beeman Universal Muzzlebrake Reviews

Well made, perfect size, good finish, killer looks and helpful when loading the gun.

Nothing!

Must have if you use a scope and the front sight has been removed.

Good fit when using the supplied shim. Helps steady the barrel. Good aid for cocking a break barrel.

Would make more models available such as heavier and longer ect. Especially heavier for more barrel stability.

Does help steady the barrel. would be better if it was heavier.

the looks are great..i like the nice bluing and it is durable.

its a little pricey as some have already mentioned.

ive mounted one on my rws 52 and my storm xt..no problems with either.

The Muzzlebreak fit perfectly with the additional shims that were sent and worked perfectly-just as listed.

The price.

looks good but i thought it was a little bigger, really does add quite the new look tho!

little bigger.. not much

get a scope, pull them sights off and buy one of these

Brianag618; This another add on feature for my new RWS 34 Break Barrel Rifle, that was recommended by the staff at Pyramyd Air. Seeing that I added a scope to my set up I wanted to change the looks of my rifle and this did the trick, gives the RWS 34 a whole different look.

Nothing

It took a little bit of time to figure out how to get the front site off in one piece w/o any damage to it. A co-worker of mine, told me to get an old leather belt, put it around the barrel for protection, and then use a set of vise grips (set loose) and tap it gently after taking the screw out, and the old site slid right off, ready to re-install at a later time. Putting the Muzzlebrake on was a piece of cake, used the small adaptor sleeve and everything slid right into place. Do not try to force the front sight or it will break, be gentle.

Does aid in cocking,and does direct the report forward allowing one to clearly hear the twang of the compression spring upon firing. It's installed on a RWS M-34 and shimmed out nicely.

Specialty item I suppose justifies the cost ?

After taking off the front sight of a Beeman RS1 wich took the careful use of a utility knife and pliers it fit great with the thicker shim. It really does do all the things they advertise. Makes cocking the gun a lot easier and does help balance the gun. Protected the end when i didnt realize the end of the barrel when i hit it on a tree on accident. Im not 100% if it does direct sound forward, ive never been in front of the gun!

Make it a little cheaper evn $20 wouldn't be as bad.

The size. Makes the best cocking handle for my model 94

The price, even though PyramydAir had it several dollars cheaper. There is no need to have such a small piece of metal cost so much. I mean come on its not like its platinum or something.

Fits great on RWS Model 94.

The fit was great. I had a previous muzzle brake and it would not stay tight and did not come with shims like this one to keep the set screws from indenting your gun barrel. This brake works very good. I put it on my Diana model 34 for folks to have a reference.

Maybe offer a smooth version of this with the shims and port it as well.

If you need a great brake then trust me this is your brake that you need. I judge things stiff but I like this one.

Quality piece of work A little pricey. for a chunk of metal. Anyone that can operate a lathe and drill press could make one for less that 5 bucks.

More variety in shims. The one I had to use was very tight and liked to have never got it on. The other shim would not fit. The gun used on was Mdl 34 RWS.

Really adds to the cocking effort plus you are not wearing the bluing off. Makes the gun look like the barrel is a mile long.

5 minute installation. Very handsome.

Use a folder or notebook cover to tap the shim into the muzzlebrake.