Hill Pump MK3, Up to Reviews

it works very well

nothing

i am 62 years old i can pump 3000 lbs but it takes a while i have to rest

Straight forward set up and easy assembly. Reliable and accurate pressure gauge, always agrees with the gauge on my rifle.

Nothing that I have found.

Works as advertised.

Overall this Pump is really Top, and works even better than advertised, i had one and sold to my friend, he has 2 Diana P1000, he is continuously filling his both Dianas up to 300 bar with this Hill pump, and till now the hill pump is works very good,,, last year i bought 3 and this year i have my order placed for 5 more,,,1 for myself and rests for my friends,,

no thing,,, it is perfect...

you need to let the pump for some time after pumping until the pump will cool down. if you repair it each month( cleaning & re-lubing parts and o-rings) this pump will late for years ,,,,

Pumps easier than the Benji pump.

Nothing

If you are going to hand pump a PCP to 3000 psi. just get a Hill. The Benjamin Pump works too hard getting to that psi and you'll be rebuilding it quite a bit.

excelent quality

a longer hose

very short and uncomfortable hose

Works as advertised. I like the Dry-Pac system to help remove moisture.

Nothing

Works very well and pumps up the small reservoir on my Benjamin Marauder pistol quickly.

Simplicity of setup. Easy to use.

Nothing

If you are lazy do not buy this pump.

I can throw my treadmill and exercise equipment away because this is all I need for a good workout.

The price.

I am going to buy a tank because this pump is just not practical if you want to do much shooting. Way too much work.

Great pump. it works as its designed.

Nothing. Its a pump, it pumps air.

Well made product.

none.

If you are more than 5' 9" tall, you may experience back pain from pumping this more than a few times.

I read lots of reviews before purchasing this pump. Not disappointed very good quality. Bit of a cardio workout filling my Hatsan but very doable.

Put some written instructions on the box! The instructions are all in funky pictures. One set of which neither I or my wife could figure out what it meant to say.

Good Quality and Rebuildable

Nothing

I have found that if you pull the handle all the way up and hold it up for 5 seconds or more, then smoothly and briskly push all the way down and HOLD for 10 to 15 seconds AT THE BOTTOM of the stroke you will need less strokes. This becomes more important as the pressure goes over 2000 psi. On my Mrod, I can get 30 psi rise on each stroke (in the 2000-3000 range) by doing this. I use a large 4 1/2" 5000 psi industrial gauge in the charge line to monitor pressure and to verify that the little gauges are correct.

Very high quality. Extremely well made

This pump is very hard to use. You need to be in excellent physical shape to use it. I was never able to charge my Recluse above 1500 psi.

If you have to use a hand pump to charge your air rifle, this is the best pump you could purchase, a little on the expensive side, but as had been said many times, " you get what you pay for " definitely a high quality pump, very well made.

I added a extension on to the hose that comes with the pump and it could still be a bit longer to facilitate a easier fill.

Start out with the best and you will have no regrets.

Got it on sale w/free shipping , I loved that part. It's also well made w/ brass fittings and stainless and rebuildable.It's my first pump so its hard for me to rate it vs other pumps. I'm quite impressed with it though no cheap plastic on it anywhere.Takes about twenty or so pumps to fill my Marauder from 2kpsi to 3k psi.

Design a way to make them automatic -

First fill , get warmed up... .

Life Time Warranty and Replacement Parts without voiding the warranty. Filters out moisture.

LONGER HOSE. Swivel hose or fill connection like a foster fitting.

I have an Air Arms S510 and I use the Hill Pump MK3 to fill to 200 BAR or 2900 PSI with a little elbow grease towards the end. Its not as bad a people would lead you to believe, I've found its really all in your technique.

Easy to assemble and operate.

It needs a longer,more flexible hose.

At 153 pounds, it is fairly difficult for me to execute the last couple of strokes to fully maximize the pressure for the HW 100.

This Hill Pump MK3 is very well made and very comfortable to pump up my HPA tanks . It is so much better than my previous Air Force pump which failed in short order. My pump was shipped to me very quickly, Pyramyd Air has excellent service.

The only thing I did not like was that the Hill Pump did not come with a quick disconnect fitting. It has to be ordered, fortunately I took the hose and quick disconnect fitting off my Air Force pump and it screwed on perfectly on my Hill Pump.

The Hill Pump has a lifetime warrantee and it is rebuild able if repairs are needed. It also has an air filter and air dryer on it which should enhance reliability and fill your tanks and PCP guns with clean air. The Hill Pump might cost a bit more but it is worth the extra cost. I highly recommend this item.

Well built and like the inlet filtering

A big fellow to make the handle move up and down.

When it was new it seemed to work fine. A month later with not much use it started getting harder to pump. Sent it back twice to be repaired, never worked right again.

Have a Benjamin pump I got before the Hill and the Benjamin is still going strong after over a year of heavy use.