UTG Scope Mount Base, Fits Reviews

Fits my Diana model 54 Air King just right.

The fit on my RWS Model 52 is perfect. I have not shot my gun yet with this mount on due to waiting on my scope rings.

I do miss the days of metal.

This mount will fit secure on your gun and I can see it not moving.

Changing scopes on my RWS 45 required me to get a picatinny type mount. The on line chat guy suggested this mount. I ordered one and got it quickly from Pyramyd. It mounted easily to my rifle and I didn't have to shim the scope rings like I usually do. The scope sighted in easily and stayed put.

Nothing, solid build and easy to install.

Use Loctite on your screws and use a quality scope ring. Also you will usually only need medium height rings instead of the high rings. This will give you a good line of sight through the scope

In stalled easily and the stop pin fit in the hole provided in the dove tail rail

Nothing

This fits very tight to the rail which is needed on a RWS 54

This mount, coupled with low rings, gave me a perfect zero with my RWS Diana 350 Magnum .177 at 20 yards. I never touched the elevation or windage knobs.

Nothing!

Just the thing to make mounting a scope feasible on Diana recoilless rifles with barrel droop. Price is fair, quality is good.

It should be longer so it can extend rearward over the whole rail of a Diana 54 or 56, and let the shooter have and affordable scope (read: short eye relief) mounted comfortably far back. Use blue thread locking fluid. If this is not possible, due to it having to accommodate the 460, make two different versions. Until that happens, get yourself a high quality scope with long eye relief. (ex. Burris Timberline 4-16x33)

The hook goes over the FRONT of the built-in scope mount, not the back. If you've bought any of the rifles this is advertised for, you should get it, and a set of Weaver rings to go with it. and some blue loctite.

price

No quality control on the finished part and could not be used as I received it. The dove tail cut radius that ended at the front stop was not fully relieved by the side cut. A small portion of the radius remained and the front stop would not contact the front of the dove tail rail on the gun. I had to get out the dremill tool and grind away on the part until the interference was removed. Either poor design or poor machining with no quality control to inspect the feature dimension. Without the modification I made the part was useless

without modifying the part it is defective

Product is well made, and easy to install. Works well on my Diana 54 Air King -- now at about 1000 shots post-install -- and my Diana Model 52 (newly installed). I used blue Loc-Tite and have not had any problems.

Nothing

It does add quite a bit of height, so you may well want low scope rings -- depending on the bell diameter of your scope.

Great value for money! Easy to fit to the rifle and works well.The fitting instructions are very clear, and I really don't see why the mount base couldn't be fitted to other models.

Nothing.

Nothing.

This mount works perfectly. Does not move. Would buy another if needed.

Nothing.

I use this mount on a RWS 54 Air King and it has held rock solid for many thousand shots. I like that there is a center stop pin in the mount.

The mount sits a bit high necessitating low rings for scope mounting.

All of these UTG droop compensating mounts seem to work best with low rings on most rifles.

Solid construction but careless machining with poor quality control.

Pay attention to customer complaints. Some may appear without merit until you study the full complaint.

The machining was done so the item could not be used as designed without material alteration by the customer. Original was returned to Pyramyd who promptly sent another with the same flaw "BUT" with marks showing it had been used and without doubt returned by another frustrated customer.

Good fit on the factory dovetail. Numbered slots on the rail. Comes with proper wrenches for installation and good instructions. Good amount of elevation change, and the scope is not too high if mounted with low rings. Looks good on the rifle, which can't be said of a lot of other airgun mounts.

I would make this rail slightly longer, with more adjustment to the front. RWS 48 rifles have a short length of pull, which requires the scope to be mounted further forward for proper eye relief.

This is a good quality scope base at a very reasonable price.

It's a very solid mount

Nothing

no

The unit is very well built and fits perfectly. It was supplied with extra screw and recoil stop which was thoughtful. Also the hex tools came in handy for a quick installation. Original packaging is also handy to store extra screws and hex keys for future use.

Make in USA

Really keeps the scope from shifting.

Nothing....

Works best with the lowest rings you can find... I recommend the B-Square Low Sport Utility Rings, which have a double set of scope lockdown screws.

Looks like it would work great, if you have a T05 trigger. (read on)

Make a version to work on the newer Dianas with the T06 trigger.

As they say in the red fine print below in the item description, it is not the right one for the newer rifles. Nowadays, it will only work on a used one with the older trigger. I'm a dummy for missing this and ordering it any way, but there you have it. I'm posting this in the hopes that someone else will read the reviews but not the full item description, like I sometimes do. ;)

Very well made

Make it longer so it will fit the RWS rifles with the T06 triggers

Will NOT fit RWS rifles with the T06 triggers, as stated in the online description on Pyramyd Air’s website. Yet they include it on the package deal, I got with my RWS model 54. When I called Pyramyd Air, the promptly sent me a different adapter, and told me I could keep the UTG base and rings. They took good care of me and am sure they would do the same for anyone else, but they should fix the package deal, so all the parts fit together.

This is a solid professionally mount. Looks great.

Make it longer so a scope could be mounted closer to the shooter if needed.

This mount gives lesser compensation than the DN 034 but barely so and still far too much for my RWS 350. I am told a far lesser compensator is coming out presently. OH BOY!

This product is well made and it serves a very important purpose on any RWS rifle for which it is to be used. Don't even try putting regular mounts on these rifles they kick like mules and the shock damages the rifle and scope. The droop compensator is comes in very handy depending on your rifle.

Nothing

It you can make it work on other mag rifles like the Gamo socom extreme it's a very good deal.