*Offer expires 03/19/24 at 3 a.m. ET. Some exclusions apply.
Create an online review and share your thoughts with other customers
5.0 5.0
4.0 4.0
By Dave from USA on 2012-05-21 13:28:43
Helps with checking air pressure when refilling you PCP.
What others should know:Very tight fit with the Foster fitting on my Marauder.
1.0 1.0
1.0 1.0
By Stephen from USA on 2013-08-02 14:30:59
The idea of a small inline gauge.
Things I would have changed:The design of the female foster fitting. If Pyramyd offered a quality alternative, I would buy it.
What others should know:The tiny ball bearings will fall out of the female foster fitting. Often. Poorly manufactured fitting. I've had two with the same problem. I'm always worried that one of those tiny bearings will fall right through the male foster on my gun and wreak havoc.
Sort by: | Date
| Helpfulness
| Rating
|
---|
Filer by: |
---|
4.0 4.0
4.0 4.0
I needed an input gauge to my carbon fiber tank and this worked.
Things I would have changed:I would utilize the gauge service a little more an seperate the numbes a bit more.
5.0 5.0
5.0 5.0
WORKS PERFECT
Things I would have changed:NOTHING
What others should know:This is usually more accurate than the gauge on the gun.
3.0 3.0
2.0 2.0
The gauge is accurate
Things I would have changed:the female fitting got sticky. Its kind of a pain to attach and detach.
What others should know:Make sure the fittings are attached and locked in fully. If it can pop off, it will, with a bang!
5.0 5.0
5.0 5.0
Having an extra gauge to double check the pump gauge.
Things I would have changed:Make the gauge larger.
What others should know:Worked very well.
4.0 4.0
4.0 4.0
Very well made.
Things I would have changed:It is too small and difficult to read. You must get too close to read it.
What others should know:It is advertised as 0-4500 psi but the gauge dial is 0-6000 psi. This reduces accuracy. Be very careful if you must get close to read it. If something fails or pops lose you could get injured. Wear eye protection.
2.0 2.0
2.0 2.0
It does work and for those filler hoses that do not have gauges on them, this is one of the easiest options.
Things I would have changed:The writing on the gauge is much too small and the gradients (500PSI) are too difficult to use. The gauge only covers 1/4 of the whole face. Get a gauge that covers 2/3 of the face with 200psi increments and this will be a great product.
What others should know:The gauge connects to your existing filler hose. It's actually quite small. The photo does not make that very clear.
3.0 3.0
2.0 2.0
It's a good design with quick disconnects on each end and the size & functionality are good.
Things I would have changed:Better QC is needed. Mine leaked at the gauge upon arrival making it unusable out of the box and to top it off the female QD fitting was too 'tight' and would not lock down. I really had to work it to get it on the first time but after making and breaking the connection a number of times it became much better and worked normally. I called PA's tech support, which is very good by the way, and was told to try using teflon tape on the pressure gauge but that didn't even work. it still leaked, just a bit less. A replacement is on the way.
What others should know:Air Venturi needs to step up the QC of their HPA products to make me feel comfortable with them. Ill fitting connections and leaking products do not bode well in 4500 psi applications so I'm a bit leary at this point. I'll update or add another review upon receiving the replacement unit. Hopefully I just received a dud, which sometimes happens. PyramydAir gets 5's across the board for outstanding support and customer service so feel confident buying from them.
1.0 1.0
1.0 1.0
The idea of a small inline gauge.
Things I would have changed:The design of the female foster fitting. If Pyramyd offered a quality alternative, I would buy it.
What others should know:The tiny ball bearings will fall out of the female foster fitting. Often. Poorly manufactured fitting. I've had two with the same problem. I'm always worried that one of those tiny bearings will fall right through the male foster on my gun and wreak havoc.
5.0 5.0
4.0 4.0
Helps with checking air pressure when refilling you PCP.
What others should know:Very tight fit with the Foster fitting on my Marauder.
Buy With Confidence
TEST Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
We have a team of expert technicians and a complete repair shop that are able to service a large variety of brands/models of airguns.
Additionally, we are a factory-authorized repair/warranty station for popular brands such as
Air Arms, Air Venturi, Crosman, Diana, Seneca, and Weihrauch airguns.
Our experts also offer exclusive 10-for-$10 Test and 20-for-$20 Service,
which evaluates your air gun prior to leaving our warehouse.
You'll be able to add these services as you place your order.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
TEST Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
123 text Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By Richard
2.0 2.0
3.0 3.0
Small size. Allows confirmation of pressure in the line and tank during filling.
Things I would have changed:Tolerances on the foster connectors is lacking. When the hose is pressurized, it can cause a "hammering" effect, which can break one of the connectors (the female end).
What others should know:This idea is excellent, however the fittings are not durable enough and quite loose before the line is pressurized. Mine split half of the female retaining ring off, so I can no longer use it, after around 15 uses. The only way to make this work reliably is to do the initial pressurizing of the line very, very slowly. If you don't, the "hammering" effect can cause the female fitting to break.