Air Venturi 46M Upgraded Trigger Reviews

An inexpensive way to add more adjustments to your IZZY. Gives more length to the trigger than the steel stock trigger.

The edges tend to be slightly sharp. The aluminum base is light, perhaps a small bit flimsy.

Get one!

I am very happy with this trigger. Installation was quick and easy. Much better feel than the skinny stock trigger. My IZH46 gets a lot of use on my deluxe garage range and this trigger is an inexpensive upgrade. My scores have improved.

Nothing

Be sure to use a properly fitting screw driver to remove the stock trigger. The slot is wide and shallow and the screw head is easily damaged.

A very simple add-on device.

I would have liked a description of how to remove the original trigger since it was very difficult to loosen the set screw.

The set screw needs to be turned counter-clockwise to loosen it and it's very tightly torqued. It helps to soak it with Kroil oil before trying toter it.

This unit fits properly, provides a good range of adjustments, and works as designed.

Its seems rather lightly built, and makes me worry about service life if adjusted many times. The addition of being able to change the rotation (cant) of the trigger shoe would make it a completely adjustable unit.

I would recommend it. I'm keeping it on my air pistol. It was a very worthwhile purchase for me.

Easy to install

Nothing

Adjustable finger angle

Little pricey

Must have item. More easy control two stage trigger.

Easy to install

I would have enclosed a simple installation sheet. One page. No big deal.

You have to lower the first stage adjustment screw.

I think the OEM trigger is a little thin and of less quality be-fitting this fine pistol. This upgrade changes all of that feeling. It makes the pistol feel like the championship quality pistol that it is.

Hmmm...A small, not too small, instruction leaflet would be nice. Example: The first stage screw must be lowered out of the way so the trigger stem can slide onto the trigger slot.

This is a must have accessory. Very little expense and the practical use over-shadows the cost.

great bargain upgrade

you may need to re-adjust your sights = definitly better tighter groups

The unit is well made and installs easily. It gives a lot more tactile feel so I know when I have my finger square to the trigger. It's easier to know that I'm stroking the trigger straight back and not either pushing or pulling to the side.

My finger does not fall horizontally across the trigger. I doubt if anyones' does. It would be nice if the trigger blade could be rotated to accommodate the downward angle of the trigger finger.

As others have mentioned, this trigger cannot be adjusted quite as far back as the factory one. For me this is not an issue. Do remember that you want your finger to be square to the trigger after you've taken up the first stage travel. Also, I got a better fit by turning the blade upside down on the shaft. This is easily done.

Perfect trigger for your pistol.

Nothing

finger position most better with this

The concept of an adjustable trigger is good but this design will increase the reach considerably.

If the strut that clamps to the sear had an offset (sort of a "dogleg" then you could shorten of lengthen the reach and still have angle adjustment.

I kid you not! The very first shot I took after installing and adjusting this trigger I just about took out the bulls eye. Very easy to install and adjust.

I am not sure how it could be done but an adjustment for pitch on the trigger is the only movement missing

I have a custom grip on my 46m so the issue of the trigger being more forward isn't a problem. I was thinking of getting a slightly bigger grip but now I am not so sure. The trigger is just perfect.

Fits well and a cost effective alternative to other products made for target rifles and pistols.

Add a center groove across the middle of the shoe to aid in positioning the fingertip. (I really need to buy a mill)

I installed this with the trigger shoe inverted with a slight angle to the right (right handed), as I like how the pad of my finger rested in the same location. I removed some molding flash to smooth out the contact surfaces. This shoe makes the 46M more consistent to shoot, but it takes a while to find the sweet spot where actuating the trigger doesn't move the sights left (trigger too far forward) or right (trigger too far rearward).

Everything you need to upgrade the trigger is included in the package. I took the pistol to a local gun shop for them to do the replacement as my dominant hand was in a cast and they completed the replacement in about 5 minutes. + no charge because it is my son's target pistol for 4H competitions. Needless to say, The Shootin' Shop South in Littleton, CO gets my future business for guns that go boom.

While I could see how to remove and install the new trigger, others may not and some step by step instructions may be good or perhaps a video walk through.

My son likes the feel of the new trigger and he is shooting a number of rounds for the competition in July. I think the new trigger will assist with the overall shooting of the pistol.

Well made.

Make this replacement trigger so that it would provide better reach for someone with smaller hands. My trigger finger just barely reaches the standard trigger when it is in the rear most position. I was hoping that this assessory would help. It didn't. I can't use it at all because it extends the reach even further than the standard trigger even when it is adjusted to its rear most position.

A neat item for those who have longer trigger fingers and are looking for a bit of additional adjustability.

I think this upgrade solved all my questions! Great idea and it works!!!

None

I had a problem with loosening the screw on the trigger and contacted service and they told me what not to do. I think I have found out what to do. I used a vise grip (needle nose) and squeezed the trigger right next to the screw then I rotated the screw which would not move previously!

Concept is right on

Fit was a little dirty on the virtical stem. The horizontal slide had to be tighten more than expected due to fit.

I would recomend this product.

Very easy to install. Loosen one set screw and slide the old one out, slide the new one in and tighten set screw - you're done. Very easy to adjust vertically and axially. Necessary Allen wrenches are included in package. Very comfortable for us left handers. Eliminates the discomfort of the old trigger being canted to the right for right handers.

Nothing.

A must-have for left handed shooters.

I am left handed and left eye dominant. These trigger shoes along with left handed grips that are now available allowed me to completely convert my IZH 46m to a left handed pistol adjusting exactly to fit my shooting style.

nothing

The right canted IZH 46m trigger just didn't work well for me, although I really like the pistol. About the same time I bought the IZH 46m I bought an Anschutz 6202 trigger shoe for my 1980s era Anschutz free rifle, but diverted it to the IZH 46m when I saw it will fit. I found it worked very well. When I decided I needed to order a second 6202 trigger shoe for the rifle these appeared at PyramidAir. They are very similar to the 6202 and work as well as the Anschutz shoe on the IZH 46m for about half the price.