OEM Breech Seal, Fits Beeman Reviews

Worked perfectly to replace the deteriorated seal on my Beeman R10. Took only a few minutes to install.

Nothing

Great web site, good communications on shipping. Product is an OEM barrel seal replacement made by Vortek.

Use only quality products like this, no cheap Chinese imports. This is an $8.00 part, why scrimp on quality.

Does what it's supposed to, seals the breech. I put it in an old R1 and it fit and functions perfectly.

Nothing.

Excellent fit

I wouldn't change the thing

I'd like to say that I got excellent customer service

It works great thanks

It took 3 weeks to get it

I'll still be ordered more from You thanks again

Fits the gun well, brought back the performance had in the HW-50 back when I was a kid... 50 years ago!

I love the new material used to construct this seal. While the color is different from what's pictured on the Pyramid site, it seems to be very durable and the fit is perfect. I purchased two (I always like to keep a back-up on hand) to replace the original breech seal in my 33 year old Beeman R10. The original looked and felt like white paste and failed miserably in providing an airtight seal upon firing it recently. With this replacement, my R10 is now ready for 30+ more years of shooting fun.

Reduce the shipping fee for tiny items; it nearly match the cost of a single seal in this case! Buying two breech seals made the final cost slightly less painful, but it still hurt.

Easy to order, easy to install. Never knew how bad the old breech seal was until I installed this replacement part.

Nothing

Takes 1 minute to change out. Increased velocity

My first order with PA was an adventure. Took way too long to receive product, but in fairness one item was back ordered. Placed this second order and all went well. Job well done. Ordering the Diana Chaser Tonight...and I know they are on backorder.

You should open a,store in central Florida

As others have mentioned. The replacement mainspring for my Beeman R1 does not require a spring compressor. It went back together easily, and shoots great.

Fit my old Weihrauch HW30 perfectly.Brought new life back into my old pellet rifle.

Nothing.

My old seal was so worn that some pellets would not even exit the barrel. Now the power is back. Accuracy is great again. Having the breech sealed properly makes the difference between an excellent gun and a wall ornament.

The breach seal was easy to install and solved my 'lack of pressure' problem. (The old seal had solidified and came out in pieces!)

Perhaps insert brief installation instructions in the package.

(Obvious, but...) Make sure that you install the new breach seal with the flat end down.

This seal fits my Beeman R1 perfectly.This seal is a different material from the original part. I hope it lasts as long as it did (over 20 years).

easy to install & works great

nothing

nice

I recently bought an old Beeman HW70 that had been sitting many years without use. Accuracy and power was very poor and I could feel air escaping from the breech. I bought this seal from Pyramyd Air and with-in 5 minutes this old pistol was restored to it's original accuracy and power. The part fit perfectly right out of the package.

Pyramyd does not list this part if you simply go to Beeman parts, but if you go to the schematic for an HW70 and click on the part, it shows to be available in stock. Thank you to the lady at Air Venturi who told me how to find the part on Pyramyd's web site. Also thank you to Pyramyd Air for stocking parts for old obsolete air guns.

If your gun starts to shoot really low and and pellets aren't making nice round holes in the target, Put your hand over the breech when you fire the gun and if you feel a puff of air, the problem is probably the breech seal needs to be replaced. Just another bit of praise for the Customer Service at Air Venturi: A few days after ordering the part, I got a call from the Technical Service Department at Air Venturi and they were just making sure that I found what I was looking for and checking to see if I needed any more technical assistance.

Fit right in my Beeman R-10 and seals good.

provide good instructions for all different models, after installation the plastic The plastic sleeve was crushed when I cocked the gun. Had to take gun apart and remove and discard the plastic sleeve.

I cut 3 coils off of the spring and the R-10 still shoots over 900FPS.

I bought this for my HW 30 and my HW55. It does not fit the HW55 (it was not listed but I tried and there is a reason it was not listed for the 55).

It does not fit an HW55CM.

This breech seal fits my Weihrauch HW50S air rifle, and works great. After many years of non-use the old seal came out in pieces like bread crumbs.

Nothing. It's fine.

This was my first purchase from Pyamyd Air. It probably won't be my last.

This breech seal worked perfectly as opposed to the one I made. I own a Machine shop and I can't produce these for $6 unless I made a bunch of them. I needed 1 and I bought 3 to have on hand just in case. NO brainer.

Nothing

Make sure you have a new one in hand before you take the old on out of the gun. Also sometimes these can be a little hard to get out of the gun. Be patient and take your time.

Fits my 20+ year old Beeman R7 perfectly.

Installation was easy and straight forward.

My HW50S was good as new after replacing the breach seal. Hopefully it lasts as long as original part.

Nothing, glad Pyramid had this part!