AirForce 11mm-to-Weaver Adapter Reviews

Nice setup. Well made. Pleased with this perches.

A little cheaper.

Works perfectly.

Range of fitment and bottom iron sight aperature

Offer one without the bottom aperature for closer mounting to the bore from a small objective bell optic

Outstanding quality!

The adapter is well made. It fits the 11 mm rail securely and allows you to mount bipods or scopes that require a weaver rail

It would be nice if they made a version with a square front

solid mount

would not fit grooves on my gun After a lot of filing finally got it to fit

not sure if it was my gun or the mount

I bought this to use on a IZH 60 with steel breach and the dovetail was its own size? The unit is one piece so it tightens evenly, unlike others having to close up against one side and end up a bit canted. I like the angle cut and it can be used forward or back for a very clean look. Mounted a Vortex Spitfire x3 and its sold as a rock !!!

It would be convenient if it would do a Picatinny also.

It will fit the odd size dovetails used on some guns.

Great shipping and arrived in good shape. I ordered two they were easy to install. They are sturdy. Nice to have picanny rail for quick attach accessories.

A longer length would be nice for one piece! Like the one airforce makes, but just in picanny rail. These are heavy just FYi.

Im loving this on my condor! Works great.

Fits well and is very secure and also complements the look of the Airforce gun.

Nothing

Excellent for my bipod

It's too short for anything but a bipods buy 2 or 3 if you're going to put a scope on it $$$$.

Fit my Condor the best tried two others and they did not fit that well this one did, this is a well made part.

Make a little longer

Very well made

piece of cake install. Looks to have plenty of room for bipod and predator light. If not, I'll have to buy a second but this is a quality piece. My Condor SS is looking sick with the bipod!

I feel like it is highly priced but that is an individual perspective.

Perfect Match for my Hatsan Supercharger 25 pistol!!! Rock solid mounting used a Vector Optics Green Dot Micro reflex sight. Awesome combo!

Nothing!

Perfect size for the shorter length dovetail on breakbarrel pistols. And......Rock solid mount, absolutely no movement from the super magnum spring in the Hatsan Supercharger pistol!!

Works like it should ! Scope didn't move a micron!I mounted it on a Browning 800 and the 800 shakes 90% of the scope mounts off and trashes the scope. This is one of the 10% it doesn't move at all!

I didn't know that the other screws opened the mount to fit on the 11mm groves on the Browning 800. Better installation directions would help. None were given with the mount.

I mounted a $350+ AimPoint on this mount and it shoots nothing but 10's

I like that it has four machine screws to hold it to the dovetail,Strong hold.

nothing

I read the other reviews and what I did to help not to have machine screw problems was to clean the threads of any aluminum,and put a drop of gun oil on the threads and the head of the machine screw.Then tighten them 1/4 of a turn,first the two center ones then the two outer ones untill they were tight. What I did with mine was to machine three tabs off to install the hardware of a bipod called polecat made by Stoney point.I have three bipods which I interchange with other guns.One is 5 inches for bench shooting.( I modified it),One is 12 inches and the other is 43 inches for sitting.The legs do nt fold so you have to carrie one or more with you.I like this setup maybe you will to.This AirForce adapter holds these bipods very well.

Installed very easy,just slide it on and bolt it down where you want it.Purchased this for a bipod,very solid platform and it looks killer on the Airforce rifles!

As others have said,a little longer would be an extra plus.

Shoot Safe! Happy Shooting!

Well made and works great on my Condor SS rifle. I knew going in I would need two for my scope setup, so I have no complaints but they should be less money or make them another 1" to 2" longer for the same price.

Lower price or make longer.

They do clamp extremely well on the 11mm dovetail on the Airforce Condor. Once properly tightened down, they aren't ever going to move.

Sturdy construction Looks goon on my Talon SS

Too short for scope Slightly overpriced

This is a great product. It has a solid construction and perfectly matches the look of Airforce rifles. If it was $10 less and longer it would be outstanding. Since I used it to mount a small red dot sight the length was not an issue. If you want to mount a larger size scope you might want to consider purchasing a different mount (or 2 of these).

adds height and makes it more versatile for adding accessories.

Make it an inch or two longer

It secures good to the Talon SS dovetail rail and the spec is within tolerance for picatinny QD mount.

Why is it so short? I had to get two to give a bit more room to secure my Larue LT-104 QD mount which I swap back and forth with my AR. Can't Air Force just make one that's couple inches longer?

I have to get this adapter for the Talon SS so I can mount the big scope with the QD from my AR. Air Force should have given options for dovetail or picatinny rail for the rifle so I could reduce scope height. Perhaps I just need to buy a dedicated scope instead...