Skenco UltraMag Metal, .25 Reviews

Accurate, hard-hitting, shoots well in my gas-piston Benjamin Trail XL.

Expensive. Not enough pellets per container.

Good pellet but I think there are better values in .25 for this application.

Consistent flyer and hard hitting

Id offer these in higher count, as i burned through 50 faster than id have liked

I shot these through my break barrel hatsan mod 125 in .25 cal

Shape

Design

They don't shot well at all out of my gun.

They fit in my Gauntlet magazine, hole in hole at 30 yds,

The plastic can, lol

I hear they will not fit in some magazine, I will try them in my Gamo coyote in 25 cal, to see, or my hatsan flash in 25 cal, or my hatsan bullboss also in 25 cal.

The look cool.

It doesn't fit in my Hatsan magazine which is a real bummer.

They don't fit in magazines.

The look cool.

It doesn't fit in my Hatsan magazine which is a real bummer.

They don't fit in magazines.

SHOOTS OK

NEEDS TO BE OR HAVE A MORE TIGHTER FIT FOR HATSAN MAGS HANGS UP WHEN COCKING SOMETIMES

CAN PULL THE TIPS OUT TO USE AS A REGULAR ULTRA MAG

Good hard hitting pellets,go straight threw rats,

Nothing , but could be more pellets in can

Good pellets , I have these in .22/.25 call.you can't go wrong with these

Was attracted to the metal tip.

Warning.... these did NOT fit my rotary magazine. Too long. disappointed, what to try them out. Bought two packages, but now not useful.

Hard hitting for light weight

As with the .22 offering of this Round,,,I'm a huge Proponent!!!,,,This has got to be one of my favourite Rounds of Choice for Jack-Rabbit's when I'm in the Field. This Round in combination with my .25 Hatsan AT-44W, I'm "Easily" getting 100 Yd,. Head-Shot's!!!,,,With the Right Rings(SportsMatch Fully Adjustable!) & Good Glass w/ a Mil-Dot reticle, Distance Shooting is Easy!!!, and these rounds have a great B.C.,,,,and are an Extremely Accurate Round for any PcP Rifle,.

Make the Tip as Pointed & Sharp as the .22 Offering!, and get rid of the Plastic "Tin",,,,It's "Useless"!

Due to this Rounds Cylindrical Shape,,,It Flies extremely Straight & True!, & Has the Weight necessary for a Good, Humane Kill,,,,,,,When i go Out for Turkey,,,I pull off the Pointed Tip w/ Needle-Nose pliers, and substitute the Brass Tip w/ an "Avanti" BB!(That's Krazy-Glued w/ a Tiny Drop!!! to the center Cavity,,,,the BB Centers itself perfectly!, & is In-Separable after 60 seconds!),,,,,The round comes in @ 31.5gr,. and Penetrates those Tough "Kevlar" like Wing Feathers w/ Eaze!!!, and is even More accurate @ distance than the Regular Brass-Tipped Round!,,,,and only takes 5 minutes to make 2-3 dozen,,,,more then enough for a Day in the Field.,,,Due to their length, These Rounds are NOT Magazine friendly!

Seem to be well made and fairly consistent.

Couldn't say, bought these for my .25 hatsan at44-10 and they're too big. Stick out both ends of the magazine, didn't even try to stick the mag in my rifle let alone cycle any.

Only will fit in pcp magazines that are extra thick and or have a single shot tray at disposal. For the price worth picking up a tin of these if you can fit them in your rifle. Mine now are a paper weight.

I have not used this product except for target shooting. It is accurate. The steel inserts fall out frequently.

They need to find a way to crimp the metal tips in better.

Metal Tip, nice design and idea, looks good.

Make the pellet size more consistent. Improved accuracy.

I've shot maybe 20/50 in the tin. Most pellets fit perfectly flush in my Hatsan 135 QE .25 cal. However, there were 3 out of about 20 that I shot which almost fell straight through the barrel as I was loading it. Therefore, the diameter of the pellet is not consistent. They do shoot out of the gun, but not accurately. At 20 yards, open sights, I peppered the entire target and had no groupings. With my other pellets (bought 4 tins of pellets) they are almost going through the same hole at this range open sights.

Skenco quality. Penetration. Accuracy. Does exactly what its design to do. For me its well worth the price and small containers. Both my Hatsan Torpedos like this pellet M155 in .25, M150 in .22 which ive taken Turkey' w/this pellet at 30+yrds. Plan on using it for Turkey' in the .25. Boar Coon Skull buster.

These take over where a PolyMag leaves off. I get 75 yrd accuracy w/ PolyMags in .22 & .25. I get 40 yrd Hunting accuracy w/ these in .22 & .25, which is my Hunting range. These will punch holes easily, in things that will stop/flatten a PolyMag. For me it penetrates as good/better than a Gamo Rocket & is much more accurate, delivers more punch. Everything Skenco ive tried works in everything i own. These can produce a meal or trophy or dispatch the biggest of Coons. 2 loose tips easily glued back in, just as accurate.

From the way it sounds I got a good run I only had one tip fall out pressed it back in with my fingers and it shot fine my marauder ikes these pretty good and I did a redneck ballistics test ya know get up on a ladder and shoot down into a bucket of water and they exploded when I fished them out every one I shot in was in three pieces the skirt and a little piece of lead the center part turned into a ring and broke off and the metal tip if I had to say they dump all of the energy into the target and fast

I had one loose tip so nothing

These are gonna make a mess of whatever you point them at so be careful

the looks and weight

secure the tips with some hot lead or something

thank goodness I bought this from pyramid air, cause they always do right by me .The best costumer service by far, no other airgun company care for their clients like they do.

I liked the weight and metal tip. I bought these before I read reviews and found out metal tips fall out. The gun's I will be testing these in are Airforce Condor Bounty hunter and TalonP

The metal tips do fall out or are loose. Would suggest to company to crimp metal tips in better

I solved the problem of the metal tips falling by removing all metal tips with a pair of needle nose pliers and twisting pellet. This does not ruin metal tip or pellet. I then put a drop of Loctite super glue on bottom of metal tip and pressed it back into pellet. Make sure you press pellet all the way in. Have not shot these yet, but will let you how well they worked when I do. In the main time I hope company fixes this problem. this looks like a sure kill pellet.

I did not like these at all 1/4 of the metal points had fallen out in the tin. I tried to super glue some in but quit when I glued my finger to one of the points. Good thing skin grows back. Then I tried crimping them in. Well that did not work very well.

Skenco slipped up on this one as the points that fell out would wobble when I dropped them back in, the hollow points were so big.

I might have gotten a bad run but all 4 tins were like that.

pyramyd your the best..this pellets is for anything you want shoot....