Date: 19/3/2024 0:51
St. Patrick's Day Sale: 11% off with codeSTPAT11 at checkout.*

*Offer expires 03/19/24 at 3 a.m. ET. Some exclusions apply.

PY-A-2298

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift

Main Product Rating 4.54.5 (71 reviews) Review, article, latest buzz
UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift

UTG Scope Mount, Image 1UTG Scope Mount, Image 2UTG Scope Mount, Image 3UTG Scope Mount, Image 4UTG Scope Mount, Image 5UTG Scope Mount, Image 6

See other products by Leapers > UTG

See manual


We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

Fits guns with the T05 trigger. In 2011, Diana introduced guns with the T06 trigger. These guns have a longer rail. This adapter does NOT fit the guns with longer rails.


  • DN034 scope mount base
  • Fits RWS Diana breakbarrels...34, 36, 38 & 45*
  • Attaches to rifle's 11mm scope rail
  • Decreases barrel droop with 20.7" upward compensation at 30 yds
  • Special "recoil shock shoulder" stops scope shift--forever!
  • Hide rifle's 11mm scope rail; looks professional
  • Scope base provides secure scope mounting with Weaver/Picatinny mounts
  • 3 hex screws attach base to your Diana rifle
  • Includes 2 hex wrenches

Although the 350 Magnum is also a breakbarrel, some 350 Magnum owners have found that this base overcompensates for droop.

This mount fits guns with the TO5 trigger. It does not fit air rifles with the TO6 trigger because those guns have a scope base that will not fit this UTG droop adapter.

Item Code: MNT-DN034 [PY-A-2298]

Average Customer Review

Rating 4.54.5 (71 reviews)
5 star
4 star
3 star
2 star
1 star
55 reviews
11 reviews
2 reviews
2 reviews
1 review

Create an online review

Customer images

Sort by Date: Newest–Oldest

Rating 5.05.0 5.0

Rating 5.05.0 5.0

Things I liked:

I have a Mod. 36 made in 1998 that has lots of droop. This was a perfect solution to that issue. Works like magic. This gun has always been very accurate, now my scopes don't need shims.---HOORAY

Things I would have changed:

nada

What others should know:

low to med. rings will work better than high ones for the most part, unless you get the UTG scope with 53mm obj. lens.

Rating 1.01.0 1.0

Rating 1.01.0 1.0

Things I liked:

Nice piece of hardware but did not work for my 1980 something model RWS DIANA 45 MODEL. Scope ran out of down adjustment before it could be zeroed. I actually turned it around backwards and it worked better that way. Now had to use quite a bit of upward adjustment but i was able to get it zeroed in.

Things I would have changed:

In description, it should let RWS DIANA model 45 owners know that droop compensation may be to much depending on which model year thier gun is.

Rating 5.05.0 5.0

Rating 5.05.0 5.0

Things I liked:

fixes barrel droop on Diana 34 22 cal

Things I would have changed:

nothing

What others should know:

Bought a new Leapers 4-12 scope that was set at factory Zero . Using a leapers mount it shot 17 inches low at 30 yards and 3 inches left. As I did not want to try to adjust that much drop on a new scope so I bought this base and a set of weaver bases . Now it shoots 3 inches high at 30 yards , 3 inches right and is in my comfort zone of scope adjustability

+ Load More

Got a question or answer?
Log in to participate

  • Willie from USA asked:

    Wondering if anyone can tell me what it says on the other side for numbers. I am reading reviews for the Gamo Swarm and this what they used to replace the scope. Wondering cause it says in only fits RWS rifles and if this is the same mount. Thanks in advance http://hardairmagazine.com/wp-content/uploads/2017/05/Swarm-Bugbuster.jpg

    • John from USA answered:

      The description says 20.1" at 30 yards. At 10 yards that is about 7". There is also one with half this much droop correction. Another one that has 30" at 30 yards doesn't have a front lobe. Even if bore an scope center adjustment are parallel will probably need the 10"@30yds to correct for this. Cutting the front lobe off will allow the small scope to be moved further back for a more correct placement. There are also cantilever mounts that hang the scope further back for correct scope placement. Then correct for scope alignment by schrimming. All in all better to use a full sized scope.

  • Dale from Trinidad and Tobago asked:

    is this the mount for my 350 mag?

    • Collin from USA asked:

      What are the numbers on the top of the rail for (02, 04 .. 10, 12)?

      + Load More

      Buy With Confidence

      TEST Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

      Free shipping may not be combined with a coupon unless stated otherwise.

      View Shipping Info

      Want More?

      Join Our Email List for News and Deals!

      123 text Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

      Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

      * By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.