Roll over image to zoom in
1-year limited warranty
List Price $150.00 Save $20.05 (13%)
as low as $12/month
Earn 130 Bullseye Bucks
other products by Air Arms
and share your thoughts with other customers
Things I liked: It seemed worth the ten more dollars to purchase an extra/spare tank -- not only lighter and easier than carrying/using a manual pump to replenish air used by shooting, but the gauge -- if watched -- keeps from over-filling; and, most importantly lets one see exactly how much air pressure remains. For both my AA 200 rifles (T200 & S200) I pump/fill to 170 bar. Shooting ~75 - 80 pellets seems to lower pressure to 120 bar -- well over the 60-bar-minimum pressure recommended by Air Arms for these rifles.
Things I would have changed: The brass threaded end is BARE -- not even an el cheapo plastic thread protector is provided, nor could I find one. I definitely would provide a thread cover to not only protect the threads from damage, but to also keep dreaded dust, dirt, and the like far, far, away! (I use a small plastic bag with rubber-band about it; crude, but it works.)
What others should know: These have a finite life! Printed on each cylinder's side is a YEAR -- from what I understand, after five years from printed date, the cylinder either needs hydrostatic testing or disposal/replacement.
Things I liked: Works just like the yank that came with T200 Rifle.
Things I would have changed: Don't like the air pressure gage as well as the one that came with the gun. The bar numbers are smaller and closer together making it harder to read.
Things I liked: Perfect fit and works very well with my T200.
What others should know: Be aware it is an Air Arms tank not a CZ. This is not the same tank that came with the gun, but fits and refills the same. Still a very good value.
Show Other Reviews and share your thoughts with other customers
Is the thread on this the same as a 88g co2?
What adapter do you need to buy in order to refill this tank using a Hill hand pump?
The CZ guns that come with this kind of tank with the gauge on them (AA S200's)would come with the adapter that screws onto the tank (PA lists it (AA-S210 [Air Arms Fill Adapter, Fits...])Which would fit into a DIN fitting. To attach that fitting to a Hill Pump hose (1/8"bspp female threads) you would need a DIN adapter like AV-00044 [Air Venturi Female DIN Adapter,...]or if you use a quick-disconnect fitting, you can use AV-00044M [Air Venturi SS Female DIN...] (so if you do not have the DIN fitting that comes with the gun, you would need to get both the CZ fill adapter and the DIN adapter for the Hill Pump.