*Offer expires 04/30/24 at 3 a.m. ET. Some exclusions apply.
$109.99
List Price $119.99Save $10.00(8%)1-year limited warranty
Earn 110 Bullseye Bucks
In-stock
Sold & shipped by Pyramyd AIR
Sold & shipped by Pyramyd AIR
Air Venturi continues to innovate with products designed with the end user in mind with the world's first portable spring compressor—the Air Venturi Rail Lock Spring Compressor.
Weighing in at only 1.5 lbs this spring compressor allows airgun smiths and tinkerers to disassemble their spring, or gas piston rifles anywhere they choose. The spring compressor mounts on any piston gun's scope rail, whether Dovetail, Weaver or Picatinny, and allows for the safe disassembly (relief of pre-load) of the gun, with no workbench setup needed. Never before has replacing broken springs, burned out piston seals or leaking gas rams been this simple! The Rail Lock Compressor is just one more example of Air Venturi's commitment to designing tools that reward airgunners who know their guns.
Air Venturi Rail Lock Spring Compressor
In stock
Item Code: AV-A00012 [PY-A-7764]
Sold & shipped by Pyramyd AIR
Weight | 1.55 lbs |
Create an online review
5.0 5.0
5.0 5.0
Verified Purchase
Small, sturdy, easy to use. It works quite nicely without any modification.
Things I would have changed:Nothing
What others should know:It sits high on a Weirheuch HW80 (i.e., not centered on the rear cap). This is not a problem, however, either for removal or for reassembly.
3.0 3.0
2.0 2.0
Not much. It did work, but I had trouble getting it to hold on the rail.
Things I would have changed:More clamping screws.
What others should know:I had to drill and tap for 2 more screws to make this work. The concept is good but execution of design could be better. That's my opinion only.
Got a question or answer?
Log in to participate
Will the rail lock spring compressor work correctly if attached directly to the dovetail base on a Winchester 1100S, Daisy 1101WS, Crosman F4, Crosman Titan, or does the rifle need a dovetail-to-weaver adapter base attached to the rifle for the threaded rod and bumper plug to center on the end cap?
Will the rail lock spring compressor work correctly if attached directly to the dovetail base on an RWS 48, or does the rifle need a dovetail-to-weaver adapter base attached to the rifle for the threaded rod and bumper plug to center on the end cap?
Can this be used on Hatsan rifles?
Yes.
Only 4 left in stock
Hatsan Air Stripper, For Select .25-Cal Hatsan Air GunsOut of Stock
Estimated in-stock date 05-09-24
In-stock
Air Venturi Feinwerkbau Piston Seal, Fits FWB 124 Air RifleIn-stock
Piston Seal, Fits Walther Falcon Hunter, Walther Talon Magnum & Hatsan 125Out of Stock
Estimated in-stock date 05-09-24
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By Greg
4.0 4.0
3.0 3.0
Verified Purchase
I just didn't want to build Rube Goldberg contraption to replace the piston seal and mainspring on my FWB124. If my trigger parts went sproing all over my shop, I wouldn't be able to find replacement parts for this gun anymore. This compressor is rock solid and works really well.
Things I would have changed:The price of course. It's a bit spendy for a tool I might use only once more in my lifetime, but such is the nature of specialty tools. The first one I received was rusty, and I don't mean a little. Pyramyd was VERY responsive and sent me a return shipping label and reshipped a new one a couple days later. Annnnd the replacement had rust on it too, although to a much lesser extent. :-( Root problem: Air Venturi should either coat these with rust preventing oil or pack them inside a sealed plastic bag with silica desiccant. It came wrapped in paper. Clearly not enough to protect it from ambient humidity in the warehouse.
What others should know:Pyramid customer support is top notch. Very impressed.