other products by Air Venturi
Things I liked: Works great, well made (in USA), small ID hose, strain relief on hose ends
Things I would have changed: Bleed screw too hard to seal closed.
Things I liked: Easy to use
Things I would have changed: nothing
What others should know: Great for use. Like the small diameter line for less air loss in bleed off process.
Things I liked: I ordered the Air Venturi Scuba Tank Adapter to fill my Hatsan AT44 and it works perfectly. It is designed to fit a K valve on a scuba tank. Before I used it for the first time, I measured the pressure in my scuba tank using my diving regulator. When I attached the adapter to the tank, the pressure reading was identical. The adapter is well made and should give many ears of service.
Things I would have changed: The first stage on my scuba regulators have a dust cap to protect it when it is not in use. (It fits in where you would attach the first stage to the K-valve and is designed to keep dust from getting into the first state.) I would like to see one added to this adapter. The local dive shop gave me one to use.
What others should know: Tips from scuba diving since the mid-1980s: Buy a couple of extra tank o-rings - they are cheap and tend to be lost or damaged at the most inopportune time. (Murphy's Law: You are 25 miles out in the Gulf and go to attach the first stage to the K-valve and find that the tank o-ring is missing.) I was taught that you turn the first stage pressure gauge down and away from you when turning on the air. I've never seen a pressure gauge blow but the I have heard stories of them blowing. Always make sure your tank is secure, and preferably laying down when not in use - they are top heavy and easy to tip over.
Can I use this on a Evanix Sniper?
Will Air Arms Fill Adapter thread on to this hose?
Yes it will
Does this work with a Benjamin marauder PCP
It can be adapted to work with it. You would need to add a female QD fitting to the end of the hose. This is the one: http://www.pyramydair.com/s/a/Air_Venturi_Foster_Female_Quick_Disconnect_to_1_8_BSPP_Male_5000_PSI/4926