Roll over image to zoom in
1-year limited warranty
Earn 88 Bullseye Bucks
List Price $110.00 Save $22.50 (20%)
as low as $16/month
other products by Air Venturi
and share your thoughts with other customers
Things I liked: Very well made and easy to use
Things I would have changed: The price is a bit steep, after shipping it's almost $100.00
Things I liked: I have had nothing but success with the Air Venturi Tank Adapter, the first time I hooked it up to my 4500 psi SCBA carbon fiber tank I put a test plug from my hand pump and a pressure gauge to test pressure as well as seal, once I figured out how to adjust the bleed valve, hooked it to my Airforce Condor and filled the tank, no problems with this one...
What others should know: It's my understanding that this is only for the 4500 psi SCBA air tanks, not the lower pressure tanks, my tank is a used SCBA (Self Contained Breathing Apparatus) rated at 4500 psi that I picked up from my local Fire Department.. When you Close the Bleed Valve you push it into the tank as you twist it, there is no stopping point so just snug it down, once you do it a few times it's really simple... Don't forget to shut off your air before you bleed the line and then disconnect from your air gun tank...
Things I liked: Nothing. Purchased 3 of these. Junk. Be nice find a better design for carbon fiber tanks.
Things I would have changed: Better bleeding device.
Show Other Reviews and share your thoughts with other customers
Can anyone recommend an inline needle valve to throttle flow and ensure the airgun tank is not overfilled that will work with this line?
Has the "bleed valve spins freely" problem been corrected. Appears the reviews in 2016 all have the same problem.
Just got my new one. The collar just below the hex attachment fixture is the bleed device. It turns less than 1/4 turn and clockwise to seal, ccw to bleed. Works fine on mine.
I recently purchased this item and it works great, This is not just a hose, on the Tank end if you look closely there is a nut to tighten on to the SCBA 4500 psi connector then on the hose side of that same nut you will see some grooves on a collar all the way around, that is the twist valve used to seal and bleed the line.. I have not had any problems with the one I purchased Nov 2016.. and I use it with a 4500 psi Carbon Fiber Tank I acquired from a local Fire department.
I am not sure what you guys think this is... there is NO bleed device on this hose. It is NOT a fill station, just a hose. What screw do you think is the bleed screw. THER IS NO BLEED SCREW !
can this be used on hatsan modles with out the extra gage