
Axsor 3-Stage Hand Pump, For Sam Yang 909 Big Bore by Axsorinformation | |||||||||||||
Axsor 3-Stage Hand Pump, For Sam Yang 909 Big Bore by Axsorassociated tags | |||||||||||||
Axsor 3-Stage Hand Pump, For Sam Yang 909 Big Bore by Axsorreviews summary
Things I would have changed:The hose should be longer. It should come with a dessicant type water separator, in addition to the sump type that's built in. What others should know:I normally use my scuba tank to put 1/2 to 2/3 of the air into the reservoirs of my B50 and 909 light hunter. Then I use the pump to finish the job. A tankful of air lasts longer, and it's quicker and easier than pumping from zero. I also use it to pump my QB78 up to 1,000-1,100 psi, using a bulk fill adapter and a female QD fitting on the pump hose. This is the normal pressure for CO2 at around 95 degrees Fahrenheit. I get about 10 good shots before POI starts to drop off. It takes 20-21 strokes of the pump to get pressure from zero to 1,100 psi. More convenient than shooting my multi pump pneumatics, and it works better in cold weather than CO2..
Things I would have changed:The price is way to high for a pump. Mechanically you'll find more stability in a house of cards. What others should know:Buy a scuba tank. Its a headache and a thousand calls to customer service.
Things I would have changed:A longer hose would be helpful, though the standard hose works fine What others should know:The video is helpful, especially the reminder to pause at the top and bottom of each stroke. It is a bit more time consuming but it guarantees a full pump. The pause may be as long as 3 seconds when approaching full pressure.
|
1-year limited warranty
Other products by Axsor