Roll over image to zoom in
1-year limited warranty
Earn 43 Bullseye Bucks
List Price $44.95 Save $2.00 (4%)
other products by BKL
and share your thoughts with other customers
Things I liked: I am basing the review of this mount on a specific rifle. RWS 54. Decent quality, extra reach of an offset mount
Things I would have changed: Add more grip for uber hard kicking rifles
What others should know: Low rating for this mount on RWS 54. P.A. recommended this mount to me for this rifle. It is well made and may serve better on a easier shooting rifle. With a heavy 6x18 Simmons Proair, there is no way this mount will stay put on the Air King. I de-greased everything, torqued to BKL recommended specs and it crawls in the first couple of shots. Cleaned up again and applied rosin to all mating surfaces and no improvement. Did it all again and added torque and in 12-15 shots it walked the distance of one of the screw heads on a RWS rail. If you have a brutal rifle I'd stay away from this mount. I am going to put a Gammo stop behind it in hopes of making it work. It is good quality and fit for me if I can get it to work.
Things I liked: Well built. Always centered on gun rail.
Things I would have changed: Nothing.
What others should know: BLK mounts are alway centered because of the way the attachment block is milled. No clamps on one side like most all other scope mounts. It cost more but it works the best.
Things I liked: Very solid mount. It clamps onto the dovetail very securely. Also, since it's a one piece unit, the rings are well aligned.
Things I would have changed: The only negative on this is that the clearance between the bottom of the rings and the support bar is only 1/8 of an inch. The bottom of the turret housing on some scopes is more than this and the scope will not sit in the rings correctly without shimming.
What others should know: Excellent quality. Just be aware of the scope bottom clearance.
Show Other Reviews and share your thoughts with other customers
Can you put the technical dimensions of these mounts on your website. Length, height, etc.
Here is the specs: •Overall Length: 4” •Clamp Length: 1.65” •Ring Width: 0.6” •Bottom of Mount to bottom of Scope Tube: 0.974” •Turret Clearance: 0.125” •Weight: 5.1 oz.