Roll over image to zoom in
1-year limited warranty
List Price $14.95 Save $5.00 (33%)
Buy and Earn 10 Bullseye Bucks!
other products by Daisy
Create an online review and share your thoughts with other customers
Things I liked: Function once I figured out how it assembled. Instructions tell where the post go but they need to be hammered in. Make sure the post are aligned or you make it harder to push into ground. FYI if you try to see the stacking action before you install the posts the discs fall right thru. I read of some breakage of the stacker after being hit by pellets so I hedged my bet by gluing on a rubber pad as a buffer. Time will tell if it works. First run thru with a co2 rifle was great, they drop down INSTANTLY! So quick I thought I had missed until I counted the discs left thru the slots. Buy a ton of refills!
Things I would have changed: Thicker plastic on the front half to prevent breakage
Things I liked: Everything, holds six discs, pretty cheap, and bio friendly!!
Things I would have changed: THE INSTRUCTIONS!
What others should know: Ok, I read the other reviews and decided to buy this anyway, if nothing but for the 2 spikes and discs(the spike pack is only a little bit cheaper and I wanted to see what everyone was talking about). Here is what I found out. IF you follow the directions that come with it to put it together it will not work correctly, you have to add a 4th step or read into the 3rd alot more. The washers need to be as far as they can be against the base. This means you have to use a pair of pliers to push the post past the first stop and up to the washer itself (hammer may bend the post). After doing this it works perfectly! Happy shooting!
Things I liked: i like that it can hold 6 of the discs. also it is made a good material so it wont crack if you drop it. it also comes with metal stakes so they wont be bad for putting in the ground. it comes with 2 of the single holder stakes. that was good because i couldnt get the six shooter working at first.
Things I would have changed: i would change the size of the washers at the bottom or some other way to keep the discs in their better because they really do not stay in their after the first disc falling. the longest record of continuous discs i had was 2. :(:(:( not very satisfied but i will make a base out of some spare to help hold them.
What others should know: i leaned the six shooter holder away from where i was shooting and it seemed to hold better, but not well. if u buy this make a stand or somehow put bigger washerson. if u can put bigger washers on and it works please tell me, it would be greatly appreciated.
are these targets for use with bb/pellet pistols