Roll over image to zoom in
1-year limited warranty
List Price $14.95
Earn 10 Bullseye Bucks
other products by Gamo
Create an online review and share your thoughts with other customers
Things I liked: Comfortable. A big help when carrying it for a long time
Things I would have changed: Although there are precious few ways to mount a sling on a break-barrel air gun, it would be nice if there could be a way to attach it other than the barrel. There have been a couple of times where the barrel has opened while using it. Also, a back strap on the buttstock end would be good, to keep it from creeping up the stock.
What others should know: There are few choices out there for break-barrel rifles. This is better than carrying a 9# rifle in your hand all day. I recommend that you buy one.
Things I liked: INSTALLED EASILY ON RIFLES WITHOUT SLING ATTACHMENTS.
Things I would have changed: NOTHING
What others should know: I INSTALLED THIS ON MY CROSMAN RIFLE WITHIN SECONDS. IT WORKS VERY WELL FOR STEADYING MY AIM.
Things I liked: Useful product but my use is limited to just carrying the rifle, targets, pellets, etc. out back to plink and target shoot. Not sure how this would do for several hours of hunting.
will this work with a Walther Terrus .177 cal air rifle?
Hi, Will this work on a Sam Yang 500cc rifle..i.e, how wide does the barrel loop open? The Sam Yang 500cc guns circumference is 7.5" around, or three inches tall.
would this fit the crossman Optimus .22?
Just be wary because if the thick looped part around the barrel were to get caught between the barrel block and stock while cocking it'll likely snap the stock. Eyeball your gun while cocking and you can see there's very little space for a foreign object. Another option, but involves much more work, is to buy the front sling mount for a Trail AW and make it fit your barrel block. The Trail has a little wider spot to accept the mount, which is attached to the pin holding the cocking linkage. So the mount straddles the cocking linkage so the slot where the cocking linkage goes just needs to be 3mm wider to accept it. Look at the parts diagram for a Trail AW and you can get a better idea. The mount is $1.15 from Crosman, and you need a new linkage pin (also $1.15) since you have to drill yours out. It turns out real nice but you have to work for it...