Gamo laser kit for P-23 by Gamoinformation | ||||||||||
| ||||||||||
Gamo laser kit for P-23 by Gamoassociated tags | ||||||||||
Gamo laser kit for P-23 by Gamoreviews summary
Things I would have changed:Make the remote button stickier as it falls off very easily. Make the screws 2mm longer. Include 2 mounting screws that fasten the rail to the gun. What others should know:Well I was disappointed.. I bought this and had my friend send it to me all the way to England as pyramydair wanted like $55 just to deliver to me when it cost my friend about $8. So I got the laser and the 2 mounting screws to tighten the rail to the gun were not in the box. I had to pay more money to find the right screws, couldn't exactly walk into a hardware store holding my gun and ask if they had anything to fit it so ended up guessing the size and buying 2 different sizes before I got it right. For anyones info it requires m4x10mm machine screws. To add insult to injury, the 2 black screws you can see in the picture that fasten the laser to the rail were 2mm too short and I had to squeeze the plastic together to try and tighten them in.. which ended up making the laser point sideways.. Sigh. Not sure if this was a one off or Gamo just tarded it up but I have read others having the same problems as well. So beware about these problems because you will probably end up having to buy new machine screws. Luckily ebay has the ones you need for a few $ for a pack of 25. Mike, UK
Things I would have changed:make it cheaper, too expensive for a laser What others should know:u might have to get new screws for the laser, when i got mine, the screw it came with was too short, can u beleive that, not only is the laser expensive but i end up spending more money to get new screw, home depot nor lowes have the screw u need to screw into the bolt, so u have to buy a whole new nut and bolt....
|
1-year limited warranty
Other products by Gamo