other products by Hammerli
Things I liked: 8 pellet capacity
Things I would have changed: o ring material for lasting strength, make these with identical specs/tolerances as the factory originals so pellets fit and clip rotates without causing jams and smoother bolt action. All of these ares need changing and are a major problem with some of the replacement clips.
What others should know: Extra clips are a must. Haven said that, finding the right pellet is challenging in order for smooth operation without jams.
Things I liked: Strong composite material, not plastic. O ring seems like it will last in this application.
Things I would have changed: The price of these clips is too high for what they are. This is sort of a "BOHICA" deal. I use them in a Hammerli 850 which is a pellet fussy rifle. The occasional jam is always blamed on the pellet used, but I'm starting to suspect these clips have more than a little to do with it. Maybe the teeth on the metal part are not consistent? The o ring should be a Viton. Two of mine are harder than the other four I have. Lube helps a bit.
What others should know: Be sure to seat the pellets in these. Lube the o ring liberally. Snap the clip in the gun. Use some strength to push the bolt forward, but stop if it hangs up. Remove the clip, fire the gun. 99 percent chance there is a pellet in the barrel. Much safer to fire it down range than try to push it out with a ram rod. You might put your eye out -- for real.
Things I liked: These fit and function perfectly.
Things I would have changed: Nothing.
What others should know: Buy plenty because you will want to shoot your 850 a lot!
I'm told this will fit the walther rotek .22 cal
Will this fit the Hammerli Pheuma .22 cal.??
No, it's for the 850 CO2 rifle