Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    FREE USA GROUND SHIPPING
    Continental USA. On orders $150 and up
    Cannot be combined with coupons.

    Buy and Earn 14 Bullseye Bucks!
      What are Bullseye Bucks - Pyramyd Air

    Mag, .22 Cal, 10rds, Fits HaleStorm, Pneuma, BT65SB & AT44PA Rifles + Hatsan AT-P1 Pistol

     
    Mag, .22 Cal, 10rds, Fits HaleStorm, Pneuma, BT65SB & AT44PA Rifles + Hatsan AT-P1 Pistol
    Click for larger image and other views

    1-year limited warranty

    SKU PY-A-2764

    $13.99

    List Price $20.00 Save $6.01 (30%)

    Add to Cart
    Pyramyd Air 30 day money back

    Estimate Shipping
    Zip Code:
    Country:

    Want it delivered 08-01-2014?
    Order it in the next 9 hr and 15 min and choose Next Day Air Morning at checkout. Details

    Add to Compare
    Add to Wishlist
    • .22 caliber
    • 10rd mag
    • Fits Hammerli Pneuma, Air Venturi HaleStorm, and Hatsan ATPA44 and BT65SB rifles + Hatsan AT-P1 pistol

    Leave the rattling pellet tins at home! Load up several mags before you go out to the field and spend your time shooting, not reloading.


    In stock

    Item Code: AV-01005 [PY-A-2764]

    Average Customer Review

    5.0 (8 reviews)
    5 star:4 star:3 star:2 star:1 star:
    (8 votes)
    Create an online reviewand share your thoughts with other customers

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By RT from USA on 2014-05-19
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:perfect fit looks like factory mags
    Things I would have changed:a finer finish would make it easier to load
    What others should know:these need the pellet holes cleaned i had one that the pellets didn't slide as well as it should after cleaning i sprayed with dry PTEF spray and let it cure over nite, i can push the pellets in very easy, be sure to remove the o-ring before cleaning or spraying

    Overall rating:5.0 5.0

    Value for money:4.0 4.0

      By Kevin from USA on 2014-04-05
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Simple and effective, holds most pellets in place even when jostled.
    Things I would have changed:Needs a bit more polishing. I used some emery cloth to put a high polish on the flat face and remove a few minor burrs on the pellet chambers.
    What others should know:When replacing the o-ring, need to use a 22x2.5mm ring.

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By Gator Proof from USA on 2014-02-18
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:It is nice to have 10 rounds on each load on my Hatsan AT44W-10. Just use the side bolt handle snd advance the magazine clip, count to 10 and reload.
    Things I would have changed:Well not much, I am in a process of comparing ghe 8 clips I own. I marked the smooth side of each one with a different color of marker and keeping a log book to detetmine if any of the little mag clips are less effective then yhe other. Do far they are all the same. I colored the entire back so I could see a wear pattern in the colored surface and thetefote spot a out of balance or out of alignment.
    What others should know:I do suggest thst you keep the rubber rings that help hold the pellets in places are lubed so they dont dryout and crack. Also if you preload them and carry then in a little case then you need to check them when they have been stored. I cut the head off from an old tooth brush and use the rounded handle to reset the pellets in the mag clip before installing then in the rifle. If the clip is installed with loose pellets you will notice a weaker pattern when using that clip.
    Show Other ReviewsCreate an online review and share your thoughts with other customers

    Got a question? Got an answer?
    Log in, then enter your text.

      Sign Into Your Account

    Sign Into Your Existing Account

    Forgot your password?
      Shop at Gun Mall
      Back to Top