Roll over image to zoom in
other products by Mendoza
Create an online review and share your thoughts with other customers
Things I liked: it fits fine . my seal was cut deep in 2 areas and accuracy and power was way down
Things I would have changed: the screw that comes with it has to be bored for the retaining pin to go through it . the original screw is shorter than the new screw also and the piston seal is a little thicker. i used a dremmel and cut a groove in the end of the screw threads so the pin would lock the screw in place
What others should know: if you replace your piston seal be sure to remove the retaining pin that holds the screw or you have a mess on your hands
what tis the OD if this seal. i need one like this with 26mm OD.
The OD of the far edge of this piston seal is in fact 26mm